Hot Universe Baryon Surveyor (HUBS) is proposed as a dedicated probe of hot gas in galaxy ecosystems, which is beyond the capabilities of current X-ray observatories but holds a key to understanding galaxy evolution. It employs a non-dispersive spectrometer based on TES microcalorimeters, enabling both high-resolution spectroscopy and imaging. In this contribution, we briefly describe the progress on the development of TES microcalorimeters for HUBS, as well as that of supporting key technologies including frequency-division multiplexing readout electronics, cryocoolers and adiabatic demagnetization refrigerator, and wide-field X-ray optics. We also show the design of a pathfinder experiment (DIXE), which is being considered for inclusion in the science portfolio of the China Space Station, not only to advance the TRLs of the key technologies for HUBS, but to conduct a high-resolution X-ray spectroscopic survey for the first time.
The Hot Universe Baryon Surveyor (HUBS) is a proposed X-ray satellite project dedicated to addressing the “missing baryon problem”. Its payload incorporates transition-edge sensor (TES) microcalorimeters operating at sub-100 mK, making adiabatic demagnetization refrigerator (ADR) a key technology for the HUBS mission. Currently, we are in the process of improving the performance of a two-stage ADR prototype, mainly to increase the hold time at the operating temperature. We replace the previous chromium potassium alum (CPA) salt pill with a new ferric ammonium alum (FAA) salt pill containing more moles of crystals, as FAA has more cooling capacity than CPA per mole in the temperature range of interest. In this paper, we describe the performance improvement of the ADR prototype and present the test results.
Frequency-division multiplexing (FDM) technologies are being developed for HUBS, which contains over 3000 transition-edge sensor (TES) microcalorimeters with an energy resolution of 2 eV (@0.6 keV). As a first step, an FDM system is designed and implemented for its pathfinder (DIXE), which employs a 10x10 TES microcalorimeter array, achieving an energy resolution of 6 eV or better over an energy range from 0.1 to 10 keV. The system has a multiplexing factor of 40 within the 1-5 MHz bandwidth. The warm electronics features a Kintex-7 FPGA and Magnicon Low-Noise Amplifier (LNA), coupled with baseband feedback software. Substantial progress has also been made on the cold electronics, with LC filters fabricated to achieve a 2 μm line width of the superconducting inductor and a dielectric constant of 11 for the capacitor. Superconducting Quantum Interference Devices (SQUIDs) have been fabricated, with the readout noise measured to be less than 6 pA/ √ Hz. This report presents the initial design both on the warm electronics and the superconducting circuit, offering an overview of the progress made. The findings support the conceptual viability of employing FDM for the multiplexed readout of TES microcalorimeters in the context of HUBS.
HUBS adopts microcalorimeters based on transition edge sensors (TES) as its sensitive detectors, requiring an energy resolution of 2 eV or better. In the project’s development phase, various Mo-Cu TES microcalorimeters have been fabricated in our lab, based on different designs. In this work, we will describe the measurement system built in our lab and show the preliminary results of a TES, including various electrical and thermal properties. We also tested the energy resolution of this TES with a laser diode system, and the resolution of the TES is shown to be 0.34 eV.
The Hot Universe Baryon Surveyor (HUBS) mission aims at addressing the long-standing ”missing baryon problem” in astrophysics and cosmology. Observationally, it is realized that the detectable amount of baryonic matter (i.e., normal matter, as opposed to dark matter) in the present-day universe is significantly less than that in the early universe. Theoretically, it is postulated that such "missing” baryons are present in diffuse gas of very low density and high temperature around and between galaxies. The gas would radiate soft x-ray, but the signal is thought to be too weak to be detected by the current generation of x-ray observing facilities. HUBS plans to take advantage of the superior (photon) energy resolution of microcalorimeters, to increase the signal-to-noise ratio of detections through narrow-band imaging and to perform high-resolution x-ray spectroscopy, as the spectrum of the radiation is expected to be dominated by emission lines. The HUBS mission and the associated development of microcalorimeters are briefly described in this work.
The Hot Universe Baryon Surveyor (HUBS) mission will carry an imaging X-ray telescope (IXT) for covering an energy range from 0.5 keV to 10 keV to study the hot baryon evolution. In this paper, we report the optical design for HUBS mission and the latest developments at IPOE, Tongji Univeristy. For HUBS mission, we had designed a three-stage conic-approximation type to simplify the manufacturing process. The basic process of imaging X-ray telescopes based on thermal glass slumping has been introduced. Nearly ten prototypes have been fabricated for the process optimization over the years. In August 2018, an IXT prototype with 21 layers was measured at the PANTER X-ray test facility, indicating an HPD of 111″ and an effective area of 39 cm2 at 1.49 keV. In September 2019, the latest prototype with 3 layers reached to an HPD of 58″ at 1.49 keV.
The high-resolution X-ray imaging spectrometer of the Hot Universe Baryon Surveyor (HUBS) mission is based on the superconducting transition edge sensor (TES) technology. A TES serves as a thermometer for sensing the temperature change of a microcalorimeter to measure the energy of incident X-rays. In order to achieve high sensitivity, TES needs to operate at temperatures below 100 mK. A combination of a 4 K pre-cooling system and a sub-K cooling system is required to achieve such a low temperature. In this paper, it is proposed to directly obtain the 4 K temperature by a high frequency pulse tube cryocooler (HPTC) for HUBS. The advantages of this technology is compact structure and high reliability, compared with other technologies (for instance, multi-stage Stirling cryocoolers + Joule-Thompson cooler). We have constructed a multi-stage HPTC. The test cooling performance, as well as the design of the cryocooler, existing challenges and proposed solutions will be presented.
Hot Universe Baryon Surveyor (HUBS) is being conceptualized in China as a high throughput and high-resolution spectroscopic X-ray mission dedicated to studying cosmic "missing" baryons, which are thought to exist in the gas of very low density and temperature roughly one million degrees in the halo of galaxies or in large-scale structures. To detect weak emission from the "missing" baryons, HUBS will employ a TES-based X-ray microcalorimeter array that operates at very low temperatures. The key characteristics of the detector technology are excellent energy resolution and high quantum efficiency, which makes it an ideal choice for constructing a non-dispersive X-ray imaging spectrometer. We are developing X-ray microcalorimeters for HUBS, based on superconducting Mo/Cu bilayer films. In this work, we present results on the characterization of the Mo/Cu films and TES devices at temperatures below 100 mK, including their R-T curves, I-V characteristics, energy resolutions, etc. We have also studied correlations between the superconducting transition temperature and other properties of the films (including residual resistivity ratio, stress, crystalline structure, interface properties, and so on), and looked into factors that might affect the energy resolution of the detectors. Preliminary results will be presented.
The Hot Universe Baryon Surveyor (HUBS) is a satellite mission that is proposed to probe “hidden” baryons in the universe and thus to fill a void in observational astronomy that seriously affects our understand of galaxy formation and evolution. The HUBS payload is highly optimized for detecting diffuse X-ray emission from the baryons, with the combination of large field of view and high spectral resolution. To assess the scientific capabilities of HUBS, we created mock observations with data from a state-of-the-art cosmological hydrodynamical simulation (IllustrisTNG). The targets include systems that are representative of galaxies, galaxy groups, and galaxy clusters at various redshifts. We generated the X-ray spectra and images of the selected sources from the mock observations, taking into account galactic foreground emission, X-ray emission from cosmologically distant background sources, as well as emission from other sources along the lines of sight. The results from analyzing the mock observations show that the assumed design of HUBS is appropriate for achieving its primary scientific objectives. In this paper, we present the results and discuss issues related to observing strategies.
Hot Universe Baryon Surveyor (HUBS)1 is being conceptualized in China as a high throughput and highresolution spectroscopic X-ray mission dedicated to studying cosmic “missing” baryons, which are thought to exist in the gas of very low density and temperature of roughly one million degrees in the halo of galaxies or in large-scale structures. To detect weak emission from the “missing” baryons, HUBS will employ an X-ray microcalorimeter based on transition-edge sensors (TES) array that operates at very low temperatures. The key characteristics of the detector technology are excellent energy resolution and high quantum efficiency, which makes it an ideal choice for constructing a non-dispersive X-ray imaging spectrometer. We are developing X-ray microcalorimeters for HUBS, based on superconducting Mo/Cu bilayer films. In this work, we present results on characterization of the Mo/Cu films and TES devices at temperatures below 200 mK, including their I − V characteristics, pulse signals and energy resolutions. We have also studied correlations between the superconductivity and other properties of the films (including residual resistivity ratio, stress, crystalline structure, interface properties, etc.). Preliminary results are presented in this work.
Transition Edge Sensor (TES) is a key component for Hot Universe Baryon Survey (HUBS), which is proposed in China to address the so-called “missing baryon problem”. A stable heat sink below 100 mK is needed for the detector’s noise suppression and high resolution. Since HUBS is a satellite based observation mission, a complicated cooling system suitable for space application becomes an important supporting sub-system. A compounded cooling system, including a mechanical cryocooler and an adiabatic magnetization refrigerator (ADR), has been proposed for HUBS. The mechanical cryocooler is used as the pre-cooling 4 K stage, and the ADR is responsible for further reducing the temperature to below 100 mK. High-frequency pulse tube cryocooler (HPTC) and HPTC combined with Joule Thompson cooler (J-T) are two candidates for the mechanical pre-cooling stage, both of which are currently under development. The ADR is being designed and processed. In this paper, we will present the preliminary architecture of the HUBS cooling system, as well as the latest states of HPTC, J-T, and ADR.
The Hot Universe Baryon Surveyor (HUBS) mission is proposed to study “missing” baryons in the universe. Unlike dark matter, baryonic matter is made of elements in the periodic table, and can be directly observed through the electromagnetic signals that it produces. Stars contain only a tiny fraction of the baryonic matter known to be present in the universe. Additional baryons are found to be in diffuse (gaseous) form, in or between galaxies, but a significant fraction has not yet been seen. The latter (“missing” baryons) are thought to be hiding in low-density warm-hot ionized medium (WHIM), based on results from theoretical studies and recent observations, and be distributed in the vicinity of galaxies (i.e., circumgalactic medium) and between galaxies (i.e., intergalactic medium). Such gas would radiate mainly in the soft X-ray band and the emission would be very weak, due to its very low density. HUBS is optimized to detect the X-ray emission from the hot baryons in the circumgalactic medium, and thus fill a void in observational astronomy. The goal is not only to detect the “missing” baryons, but to characterize their physical and chemical properties, as well as to measure their spatial distribution. The results would establish the boundary conditions for understanding galaxy evolution. Though highly challenging, detecting “missing” baryons in the intergalactic medium could be attempted, perhaps in the outskirts of galaxy clusters, and could shed significant light on the large-scale structures of the universe. The current design of HUBS will be presented, along with the status of technology development.
The Hot Universe Baryon Surveyor (HUBS) is a satellite concept proposed in China to address the so-called “missing baryon problem”, which has serious implications on the formation and evolution of galaxies. At the heart of HUBS there is a high-resolution soft X Ray spectrometer based on transition-edge sensors operating below 100 mK. A cooling system is needed to provide such a low-temperature environment. It necessarily consists of a precooling stage and a cold stage. The cold stage could be enabled by an adiabatic demagnetization refrigerator (ADR). Because an ADR could be operated without gravity’s assist and has no refrigerant consumption, it is a good candidate for satellite mission like HUBS. For HUBS, the ADR will be employed to cool the detector down to below 100 mK from the precooling stage (at about 4K), which is enabled by mechanical pulse tube refrigerators. ADR for HUBS is now under development in our lab. The key technologies of building an ADR including growth of paramagnetic salt pill crystals, gas-gap heat switch are under development. A preliminary design of the ADR is completed and the design parameters are optimized. In this paper, we report on the status of the development.
Hot Universe Baryon Surveyor (HUBS), a Chinese space mission, is proposed to find a large fraction of the so-called missing baryons, which would help us to understand more about the structure formation and evolution of the universe. Both theoretical and experimental results show that developing a highly efficient soft X-ray spectrometer over a large field of view and with a high energy resolution is the key to detect the “missing baryons”. X-ray microcalorimeters based on a transition-edge sensor (TES) array is required for HUBS, which aims to have 1 deg2 field of view (FoV) with 1’ angular resolution and 2 eV energy resolution optimized around 0.6 keV. Taking the high throughput X-ray optical focusing system on HUBS into account, the TES array is designed to have 60 x 60 pixels with an area of 1 mm2 for each pixel. The microcalorimeter consists of a TES, a weak thermal link to a heat bath, and a semi-metal or normal metal absorber to increase the X-ray absorption efficiency. When an X-ray photon with a given energy is absorbed, the temperature of the absorber increase, that can be monitored by measuring the resistance change of the TES. A bilayer of a superconductor and a normal metal is used to fabricate a TES with a critical temperature (Tc) of ~100 mK. The latter is set for the required energy resolution. For HUBS, both MoCu and TiAu TES technologies are considered in its development phase. Here we will focus on TiAu TES calorimeters designed and partially fabricated at SRON for HUBS. Recent demonstration of a resolution of 2.5 eV at 5.9 keV in an AC readout at SRON for X-IFU on board of Athena illustrates the promising of this technology. However, the challenging for the HUBS array is the large pixel size. We will report the design and fabrication of prototype HUBS calorimeters.
The Einstein Probe (EP) is a small satellite dedicated to time-domain astronomy to monitor the sky in the soft X-ray band. It is a mission led by the Chinese Academy of Sciences and developed in its space science programme with international collaboration. Its wide-field imaging capability is achieved by using established technology of the micro-pore lobster-eye X-ray focusing optics. Complementary to this is deep X-ray follow-up capability enabled by a Wolter-I type X-ray telescope. EP is also capable of fast transient alerts triggering and downlink, aiming at multi-wavelength follow-up observations by the world-wide community. EP will enable systematic survey and characterisation of high-energy transients at unprecedented sensitivity, spatial resolution, grasp and monitoring cadence. Its scientific goals are mainly concerned with discovering new or rare types of transients, including tidal disruption events, supernova shock breakouts, high-redshift GRBs, and of particular interest, electromagnetic sources of gravitational wave events.
M. Feroci, E. Bozzo, S. Brandt, M. Hernanz, M. van der Klis, L.-P. Liu, P. Orleanski, M. Pohl, A. Santangelo, S. Schanne, L. Stella, T. Takahashi, H. Tamura, A. Watts, J. Wilms, S. Zane, S.-N. Zhang, S. Bhattacharyya, I. Agudo, M. Ahangarianabhari, C. Albertus, M. Alford, A. Alpar, D. Altamirano, L. Alvarez, L. Amati, C. Amoros, N. Andersson, A. Antonelli, A. Argan, R. Artigue, B. Artigues, J.-L. Atteia, P. Azzarello, P. Bakala, D. Ballantyne, G. Baldazzi, M. Baldo, S. Balman, M. Barbera, C. van Baren, D. Barret, A. Baykal, M. Begelman, E. Behar, O. Behar, T. Belloni, F. Bernardini, G. Bertuccio, S. Bianchi, A. Bianchini, P. Binko, P. Blay, F. Bocchino, M. Bode, P. Bodin, I. Bombaci, J.-M. Bonnet Bidaud, S. Boutloukos, F. Bouyjou, L. Bradley, J. Braga, M. Briggs, E. Brown, M. Buballa, N. Bucciantini, L. Burderi, M. Burgay, M. Bursa, C. Budtz-Jørgensen, E. Cackett, F. Cadoux, P. Cais, G. Caliandro, R. Campana, S. Campana, X. Cao, F. Capitanio, J. Casares, P. Casella, A. Castro-Tirado, E. Cavazzuti, Y. Cavechi, S. Celestin, P. Cerda-Duran, D. Chakrabarty, N. Chamel, F. Château, C. Chen, Y. Chen, J. Chenevez, M. Chernyakova, J. Coker, R. Cole, A. Collura, M. Coriat, R. Cornelisse, L. Costamante, A. Cros, W. Cui, A. Cumming, G. Cusumano, B. Czerny, A. D'Aì, F. D'Ammando, V. D'Elia, Z. Dai, E. Del Monte, A. De Luca, D. De Martino, J. P. C. Dercksen, M. De Pasquale, A. De Rosa, M. Del Santo, S. Di Cosimo, N. Degenaar, J. W. den Herder, S. Diebold, T. Di Salvo, Y. Dong, I. Donnarumma, V. Doroshenko, G. Doyle, S. Drake, M. Durant, D. Emmanoulopoulos, T. Enoto, M. H. Erkut, P. Esposito, Y. Evangelista, A. Fabian, M. Falanga, Y. Favre, C. Feldman, R. Fender, H. Feng, V. Ferrari, C. Ferrigno, M. Finger, G. Fraser, M. Frericks, M. Fullekrug, F. Fuschino, M. Gabler, D. K. Galloway, J. L. Gálvez Sanchez, P. Gandhi, Z. Gao, E. Garcia-Berro, B. Gendre, O. Gevin, S. Gezari, A. B. Giles, M. Gilfanov, P. Giommi, G. Giovannini, M. Giroletti, E. Gogus, A. Goldwurm, K. Goluchová, D. Götz, L. Gou, C. Gouiffes, P. Grandi, M. Grassi, J. Greiner, V. Grinberg, P. Groot, M. Gschwender, L. Gualtieri, M. Guedel, C. Guidorzi, L. Guy, D. Haas, P. Haensel, M. Hailey, K. Hamuguchi, F. Hansen, D. Hartmann, C. A. Haswell, K. Hebeler, A. Heger, M. Hempel, W. Hermsen, J. Homan, A. Hornstrup, R. Hudec, J. Huovelin, D. Huppenkothen, S. Inam, A. Ingram, J. In't Zand, G. Israel, K. Iwasawa, L. Izzo, H. Jacobs, F. Jetter, T. Johannsen, P. Jenke, P. Jonker, J. Josè, P. Kaaret, K. Kalamkar, E. Kalemci, G. Kanbach, V. Karas, D. Karelin, D. Kataria, L. Keek, T. Kennedy, D. Klochkov, W. Kluzniak, E. Koerding, K. Kokkotas, S. Komossa, S. Korpela, C. Kouveliotou, A. Kowalski, I. Kreykenbohm, L. Kuiper, D. Kunneriath, A. Kurkela, I. Kuvvetli, F. La Franca, C. Labanti, D. Lai, F. Lamb, C. Lachaud, P. Laubert, F. Lebrun, X. Li, E. Liang, O. Limousin, D. Lin, M. Linares, D. Linder, G. Lodato, F. Longo, F. Lu, N. Lund, T. Maccarone, D. Macera, S. Maestre, S. Mahmoodifar, D. Maier, P. Malcovati, J. Malzac, C. Malone, I. Mandel, V. Mangano, A. Manousakis, M. Marelli, J. Margueron, M. Marisaldi, S. Markoff, A. Markowitz, A. Marinucci, A. Martindale, G. Martínez, I. McHardy, G. Medina-Tanco, M. Mehdipour, A. Melatos, M. Mendez, S. Mereghetti, S. Migliari, R. Mignani, M. Michalska, T. Mihara, M. C. Miller, J. M. Miller, T. Mineo, G. Miniutti, S. Morsink, C. Motch, S. Motta, M. Mouchet, G. Mouret, J. Mulačová, F. Muleri, T. Muñoz-Darias, I. Negueruela, J. Neilsen, T. Neubert, A. Norton, M. Nowak, A. Nucita, P. O'Brien, M. Oertel, P. E. H. Olsen, M. Orienti, M. Orio, M. Orlandini, J. Osborne, R. Osten, F. Ozel, L. Pacciani, F. Paerels, S. Paltani, M. Paolillo, I. Papadakis, A. Papitto, Z. Paragi, J. Paredes, A. Patruno, B. Paul, F. Pederiva, E. Perinati, A. Pellizzoni, A. V. Penacchioni, U. Peretz, M. Perez, M. Perez-Torres, B. Peterson, V. Petracek, C. Pittori, J. Pons, J. Portell, A. Possenti, K. Postnov, J. Poutanen, M. Prakash, I. Prandoni, H. Le Provost, D. Psaltis, J. Pye, J. Qu, D. Rambaud, P. Ramon, G. Ramsay, M. Rapisarda, A. Rashevski, I. Rashevskaya, P. Ray, N. Rea, S. Reddy, P. Reig, M. Reina Aranda, R. Remillard, C. Reynolds, L. Rezzolla, M. Ribo, R. de la Rie, A. Riggio, A. Rios, D. Rischke, P. Rodríguez-Gil, J. Rodriguez, R. Rohlfs, P. Romano, E. M. Rossi, A. Rozanska, A. Rousseau, B. Rudak, D. Russell, F. Ryde, L. Sabau-Graziati, T. Sakamoto, G. Sala, R. Salvaterra, D. Salvetti, A. Sanna, J. Sandberg, T. Savolainen, S. Scaringi, J. Schaffner-Bielich, H. Schatz, J. Schee, C. Schmid, M. Serino, N. Shakura, S. Shore, J. Schnittman, R. Schneider, A. Schwenk, A. Schwope, A. Sedrakian, J.-Y. Seyler, A. Shearer, A. Slowikowska, M. Sims, A. Smith, D. Smith, P. Smith, M. Sobolewska, V. Sochora, P. Soffitta, P. Soleri, L. Song, A. Spencer, A. Stamerra, B. Stappers, R. Staubert, A. Steiner, N. Stergioulas, A. Stevens, G. Stratta, T. Strohmayer, Z. Stuchlik, S. Suchy, V. Suleimanov, F. Tamburini, T. Tauris, F. Tavecchio, C. Tenzer, F. Thielemann, A. Tiengo, L. Tolos, F. Tombesi, J. Tomsick, G. Torok, J. M. Torrejon, D. F. Torres, E. Torresi, A. Tramacere, I. Traulsen, A. Trois, R. Turolla, S. Turriziani, S. Typel, P. Uter, P. Uttley, A. Vacchi, P. Varniere, S. Vaughan, S. Vercellone, M. Vietri, F. Vincent, V. Vrba, D. Walton, J. Wang, Z. Wang, S. Watanabe, R. Wawrzaszek, N. Webb, N. Weinberg, H. Wende, P. Wheatley, R. Wijers, R. Wijnands, M. Wille, C. Wilson-Hodge, B. Winter, S. Walk, K. Wood, S. Woosley, X. Wu, R. Xu, W. Yu, F. Yuan, W. Yuan, Y. Yuan, G. Zampa, N. Zampa, L. Zampieri, L. Zdunik, A. Zdziarski, A. Zech, B. Zhang, C. Zhang, S. Zhang, M. Zingale, F. Zwart
The Large Observatory For x-ray Timing (LOFT) is a mission concept which was proposed to ESA as M3 and M4 candidate in the framework of the Cosmic Vision 2015-2025 program. Thanks to the unprecedented combination of effective area and spectral resolution of its main instrument and the uniquely large field of view of its wide field monitor, LOFT will be able to study the behaviour of matter in extreme conditions such as the strong gravitational field in the innermost regions close to black holes and neutron stars and the supra-nuclear densities in the interiors of neutron stars. The science payload is based on a Large Area Detector (LAD, >8m2 effective area, 2-30 keV, 240 eV spectral resolution, 1 degree collimated field of view) and a Wide Field Monitor (WFM, 2-50 keV, 4 steradian field of view, 1 arcmin source location accuracy, 300 eV spectral resolution). The WFM is equipped with an on-board system for bright events (e.g., GRB) localization. The trigger time and position of these events are broadcast to the ground within 30 s from discovery. In this paper we present the current technical and programmatic status of the mission.
The Large Synoptic Survey Telescope (LSST) is a proposed ground based telescope that will perform a comprehensive
astronomical survey by imaging the entire visible sky in a continuous series of short exposures. Four special purpose
rafts, mounted at the corners of the LSST science camera, contain wavefront sensors and guide sensors. Wavefront
measurements are accomplished using curvature sensing, in which the spatial intensity distribution of stars is measured
at equal distances on either side of focus by CCD detectors. The four Corner Rafts also each hold two guide sensors. The
guide sensors monitor the locations of bright stars to provide feedback that controls and maintains the tracking of the
telescope during an exposure. The baseline sensor for the guider is a Hybrid Visible Silicon hybrid-CMOS detector. We
present here a conceptual mechanical and electrical design for the LSST Corner Rafts that meets the requirements
imposed by the camera structure, and the precision of both the wavefront reconstruction and the tracking. We find that a
single design can accommodate two guide sensors and one split-plane wavefront sensor integrated into the four corner
locations in the camera.
David Kieda, S. Biller, Patrick Boyle, I. Bond, S. Bradbury, James Buckley, D. Carter-Lewis, Stephen Criswell, W. Cui, P. Dowknott, C. Duke, A. Falcone, D. Fegan, S. Fegan, John Finley, L. Fortson, J. Gaidos, S. Gammell, K. Gibbs, A. Hillas, J. Holder, D. Horan, M. Kertzman, J. Knapp, F. Krennrich, S. LeBohec, J. Lloyd-Evans, P. Moriarity, D. Moeller, P. Ogden, Rene Ong, D. Petry, J. Quinn, P. Reynolds, H. Rose, M. Schroedter, J. Smith, G. Sembrowski, Simon Swordy, V. Vassiliev, Scott Wakely, G. Walker, Trevor Weekes, J. Hall
The Very Energetic Radiation Imaging Telescope Array System (VERITAS) is an array of seven 10m aperture telescopes used for gamma-ray astronomy in the 50 GeV to 50 TeV (1 TeV= 1012 electron Volt) energy range. The gamma rays are detected by measuring the optical Cherenkov light emitted by the cascade of electromagnetic particles that is generated by interactions of the high energy gamma-ray with the Earth's Atmosphere. This paper describes the science goals of the VERITAS array, a description of the array, and expected performance of the instrument.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.