External resonator diode lasers are the appropriate choice for species detection in application areas such as medicine, climate and industry due to their excellent properties, but have limitations in terms of high detection rates and commercial availability in the MIR region. Especially in the MIR region, many molecules have particularly strong absorption bands, which can result in very low detection limits and is therefore of particular interest. In this paper, we present our new ICbased laser chips with straight and curved waveguides with a center wavelength at 3.4 μm. These are integrated into an external resonator setup and characterized. The IC-based system enables continuous wave operation at room temperature over a wavelength range of 285 nm with several mW output power. With respect to the problem of high sampling rates, one promising technique is MEMS technology integrated as a tuning element in the external resonator structure. This enables planar drive control for high-frequency resonance-driven MEMS scanners, where the sampling frequency corresponds to the resonance frequency. These will be tested for their suitability and integrated into an ECDL setup and evaluated. Our work will address new requirements in terms of tuning range, output power, and acquisition rate.
Although external cavity diode lasers have become firmly established for their excellent properties for species detection, they have severe limitations in terms of high acquisition rates. In this paper, we present our new ECDL design based on a resonantly driven MEMS scanner. By using the MEMS technology, a defined frequency range can be tuned extremely fast and without mode-hops. This allows scanning frequencies in the high kHz range to be achieved. The results of the characterization of the spectral properties of the MEMS-based system and its use for rapid detection of trace gases are presented.
External cavity diode lasers (ECDLs) are a well-established laboratory tool due to their excellent emission properties. However, if the ECDLs are used outside the laboratory, they have limitations in terms of tuning speed and robustness. For overcoming these limitations, we developed a new micro-electro-mechanical system (MEMS) based ECDL cavity concept. The 1D MEMS actuator defines the angle of incidence at the diffraction grating as well as the cavity length of the ECDL. Due to the high resonance frequency of the MEMS actuator in the kHz range, the switching speed of the ECDL emission wavelength is drastically reduced. Furthermore, the MEMS actuator minimizes the sensitivity to external disturbance which opens a path to handheld wide mode-hop free tunable ECDLs in the near future. Therefore we have also optimized our curved waveguide concept based on GaSb for the ECDL design, whereby a wavelength range from NIR to the MIR range can be better covered. These features qualify the new developed MEMS tunable ECDL for the high demands of the high resolution multi-species molecular spectroscopy. Application examples of the MEMS based ECDL and the curved gain chips will be provided.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.