This will count as one of your downloads.
You will have access to both the presentation and article (if available).
The planned European Stratospheric Balloon Observatory (ESBO) aims at complementing the current landscape of scientific ballooning activities by providing a service-centered infrastructure tailored towards broad astronomical use. In particular, the concept focuses on reusable platforms with exchangeable instruments and telescopes performing regular flights and an operations concept that provides researchers with options to test and operate own instruments, but later on also a proposal-based access to observations. It thereby aims at providing a complement to ground-, space-based, and airborne observatories in terms of access to wavelength regimes – particularly the ultraviolet (UV) and far infrared (FIR) regimes –, spatial resolution capability, and photometric stability. Within the currently ongoing ESBO Design Study (ESBO DS), financed within the European Union’s Horizon 2020 Programme, a prototype platform carrying a 0.5-m telescope for UV and visible light observations is being built and concepts for larger following platforms, leading up to a next-generation FIR telescope are being studied. A flight of the UV/visible prototype platform is currently foreseen for 2021.
We present the technical motivation, science case, instrumentation, and a two-stage image stabilization approach of the 0.5-m UV/visible platform. In addition, we briefly describe the novel mid-sized stabilized balloon gondola under design to carry telescopes in the 0.5 to 0.6 m range as well as the currently considered flight option for this platform.
Secondly, we outline the scientific and technical motivation for a large balloon-based FIR telescope and the ESBO DS approach towards such an infrastructure.
The Wide Field Imager (WFI) and Fine Field Imager (FFI) shall now be upgraded with equally sensitive cameras. However, they are exposed to stratospheric conditions in flight (typical conditions: T≈-40° C, p≈ 0:1 atm) and there are no off-the-shelf CCD cameras with the performance of an iXon3, suited for these conditions. Therefore, Andor Technology and the Deutsches SOFIA Institut (DSI) are jointly developing and qualifying a camera for these conditions, based on the iXon3 888. These changes include replacement of electrical components with MIL-SPEC or industrial grade components and various system optimizations, a new data interface that allows the image data transmission over∼30m of cable from the camera to the controller, a new power converter in the camera to generate all necessary operating voltages of the camera locally and a new housing that fulfills airworthiness requirements. A prototype of this camera has been built and tested in an environmental test chamber at temperatures down to T=-62° C and pressure equivalent to 50 000 ft altitude. In this paper, we will report about the development of the camera and present results from the environmental testing.
Pointing stability and image quality of the SOFIA Airborne Telescope during initial science missions
View contact details
No SPIE Account? Create one
