Photoluminescence intensity PL measurements were taken for a range of PmPV concentrations, in which HiPco single walled carbon nanotubes (SWNTs) at 100%, 10%, 1%, 0.1%, 0.01% and 0% mass fractions were added. The PL intensity of the composite was shown to decrease for all mass fractions, relative to the polymer up to 1.56x10-3g/l of PmPV, above which there is an initial increase in the composite emission yield with respect to the polymer. This increase is associated with an interaction within the composite, which results in a decrease in polymer aggregate formation, which has been shown to quench intensity yields. Within the concentration range studied 5.9x10-8g/l to 2g/l the photoluminescence intensity yield for each system is highly non linear. Previously the ratio of the maximum PL intensity of the composite, which includes both, bound and unbound polymer chains, and the maximum PL intensity of the polymer, which includes only unbound polymer chains was plotted as a function of polymer concentration. From this the authors calculated the amount of free polymer within each composite and derived a model, which showed that as the polymer concentration is lowered the bundles break up until isolated SWNTs are stable at low concentrations. In particular for their 100% mass fraction polymer/HiPco SWNT it was shown that individual nanotubes are stable in solutions ~3x10-5kg/m3. Here we utilize this approach and results indicate that as the mass fraction of nanotubes in reduced, individual nanotubes are stable at higher polymer concentrations. In particular for our 100% mass fraction results indicate that below ~1.5x10-4g/l individual nanotubes are stable. This result indicates that the choice of polymer and or solvent has a significant effect on the debundling and aggregation within these systems.
Samples of raw nanotubes are compared to those deposited from solutions to examine separation of nanotube bundles. Single wall nanotubes bundles produced by the arc-discharge and HiPco methods were solubilised in toluene, DMF and 1,2 dichloroethane. Resonant Raman spectroscopy was used to determine if debundling of the tubes sample occurred. The results showed some degree of debundling, best for the 1,2 dichloroethane solvent, which also shows long term solubility.
Single wall carbon nanotubes are insoluble in most organic solvents such as toluene. Improvements in the solubility of the single wall carbon nanotubes are however seen as a result of specific interactions with molecules such as terphenyl and anthracene. Suspensions formed in toluene with these molecules and the single wall carbon nanotubes are seen to be stable over prolonged periods. Spectroscopic analysis clearly shows an interaction between the carbon nanotubes and the molecules. It is proposed in this study that the use of these more simple molecular systems may help elucidate the nature and extent of the interaction in more complex composite based systems.
An analysis of the Raman spectra of single-walled HiPco carbon nanotube powder using laser energies of 1.92 eV, 2.4 eV, 2.5 eV, and 2.7 eV, including a comparison of the Stokes and anti-Stokes contributions is presented. The diameter distribution was determined to be 0.8-1.2nm from the spectral positioning of the Radial Breathing Modes. The diameter distribution is consistent with that determined by NIR absorption spectroscopy. At all excitation energies the profile of the G-line indicates a predominance of semiconducting tubes although at 2.4 eV there is some indication of some contribution from metallic tubes. In all cases the anti Stokes line was weak and the Stokes/anti Stokes ratio was at least an order of magnitude indicating at most weak resonance enhancement in either.
Interactions between Arc Discharge single walled carbon nanotubes within polymer composites have been well documented. Here hybrid systems of the conjugated organic polymer poly (p-phenylene vinylene-co-2,5-dioctyloxy -m-phenylene vinylene) (PmPV) and carbon nanotubes produced by Gas-Phase Decomposition of CO (HiPco) process are explored using Raman spectroscopy. Laser excitation wavelengths of 514.5nm and 633nm are employed to determine the specific nature of interaction. Also presented at laser energies 1.96eV and 2.4eV, are hybrid systems of Arc Discharge SWNTs at similar mass fractions to enable a direct comparison of solubility of each nanotube type within the polymer composite to be made. Comparisons are also made between the two hybrid systems in relation to range of nanotube diameters selected at 514.5 and 633nm.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.