Composite scarf repair monitoring using fiber Bragg grating sensors

Henry C. H. Li; Israel Herszberg; Claire E. Davis; Paul R. Stoddart

doi:10.1117/12.715516

10 April 2007 Composite scarf repair monitoring using fiber Bragg grating sensors

Henry C. H. Li, Israel Herszberg, Claire E. Davis, Paul R. Stoddart

Proceedings Volume 6529, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2007; 65291Z (2007) https://doi.org/10.1117/12.715516
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2007, San Diego, California, United States

Abstract

Structural health monitoring (SHM) technology may be applied to composite bonded repairs to enable the continuous through-life assessment of the repair efficacy. This paper describes an SHM technique for the detection of debonding in composite scarf repairs using fibre optic Bragg grating strain sensors. A typical composite sandwich structure with a scarf repair on one surface is examined in this paper. A finite element study was conducted which showed that the strain in the debonded region changed significantly compared to the undamaged state. A differential strain approach was used to facilitate the detection of debonds, where two sensors were strategically positioned so that their strain differential increased as the damage propagated. With the use of matching gratings, this technique greatly reduced the support equipment requirement by converting the spectral information into an intensity-modulated signal, thus allowing a compact photodetector to be used for sensor interrogation. An experimental investigation was conducted to validate the theoretically predicted results. The experimental measurements agreed well with the numerical findings qualitatively, indicating that the proposed scheme has great potential as a simple and effective monitoring technique for composite scarf repairs.

Citation Download Citation

Henry C. H. Li, Israel Herszberg, Claire E. Davis, and Paul R. Stoddart "Composite scarf repair monitoring using fiber Bragg grating sensors", Proc. SPIE 6529, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2007, 65291Z (10 April 2007); https://doi.org/10.1117/12.715516

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available