Health monitoring of bonded composite repairs using fibre optic sensors

Henry C. H. Li; Olivier Dupouy; Israel Herszberg; Paul R. Stoddart; Claire E. Davis; Adrian P. Mouritz

doi:10.1117/12.658414

11 April 2006 Health monitoring of bonded composite repairs using fibre optic sensors

Henry C. H. Li, Olivier Dupouy, Israel Herszberg, Paul R. Stoddart, Claire E. Davis, Adrian P. Mouritz

Proceedings Volume 6174, Smart Structures and Materials 2006: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems; 617418 (2006) https://doi.org/10.1117/12.658414
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2006, San Diego, California, United States

Abstract

Structural health monitoring (SHM) technology may be applied to composite bonded repairs to enable the continuous through-life assessment of the repair efficacy. This paper describes an SHM technique for the detection of debonding in composite bonded patches using fibre optic Bragg grating strain sensors. A two sided doubler repair is examined in this paper. A finite element study was conducted which showed that the strain in the debonded region changed significantly compared to the undamaged state. A differential strain approach was used to facilitate the detection of debonds, where two sensors were strategically positioned so that their strain differential increased with the disbond length. With the use of matching gratings, this technique greatly reduces the interrogation equipment requirement by converting spectral information into an intensity-modulated signal, thus allowing a threshold value to be set to indicate imminent critical repair failure. An experimental investigation was conducted, using carbon/epoxy patches to carbon/epoxy substrates, to validate the theoretically predicted results. The experimental measurements agreed well with the numerical findings, indicating that the proposed scheme has great potential as a simple monitoring technique for composite bonded repairs.

Citation Download Citation

Henry C. H. Li, Olivier Dupouy, Israel Herszberg, Paul R. Stoddart, Claire E. Davis, and Adrian P. Mouritz "Health monitoring of bonded composite repairs using fibre optic sensors", Proc. SPIE 6174, Smart Structures and Materials 2006: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, 617418 (11 April 2006); https://doi.org/10.1117/12.658414

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available