Paper
9 November 2005 A films based approach to intensity imbalance correction for 65nm node c:PSM
Author Affiliations +
Abstract
Intensity imbalance between the 0 and π phase features of c:PSM cause gate CD control and edge placement problems. Strategies such as undercut, selective biasing, and combinations of undercut and bias are currently used in production to mitigate these problems. However, there are drawbacks to these strategies such as space CD delta through pitch, gate CD control through defocus, design rule restrictions, and reticle manufacturability. This paper investigates the application of an innovative films-based approach to intensity balancing known as the Transparent Etch Stop Layer (TESL). TESL, in addition to providing a host of reticle quality and manufacturability benefits, also can be tuned to significantly reduce imbalance. Rigorous 3D vector simulations and experimental data compare through pitch and defocus performance of TESL and conventional c:PSM for 65nm design rules.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rand Cottle, Pierre Sixt, Matt Lassiter, Marc Cangemi, Patrick Martin, and Chris Progler "A films based approach to intensity imbalance correction for 65nm node c:PSM", Proc. SPIE 5992, 25th Annual BACUS Symposium on Photomask Technology, 59920J (9 November 2005); https://doi.org/10.1117/12.632214
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Photomasks

Reticles

Manufacturing

Wet etching

Silica

Lithography

Back to Top