Paper
13 January 2005 All-solid-state laser controller design based on digital optical feedback
Lin Liu, Jun-li Wang, Changyi Zhou, Wenqi Ge
Author Affiliations +
Abstract
The new design about a CW, digital all-solid-stated LD pumped Nd:YVO4 controller is introduced. The stable output power of this digital laser controller which adopts Digital Signal Processor (TMS320C31) is approximately 20mW. The whole system is composed of constant- current source, protection circuit, pulse-width modulation circuit, Si-photo-detector and amplified circuit and Digital Signal Processor control system, etc. In terms of error deviation Based on nonlinear control curves of LD power output by Si-photo-detector, the region control can be obtained by means of the PID control algorithm in the software platform, that is, error amendment and high stability laser power output can be achieved. And the precision of temperature control can reduce from ±0.2°C to ±0.04°C. By adopted integral separated mode PID control algorithm, the LD output power instability (σ%) down to ±2%. By way of adopting the new digital design, the work to protect the laser diode, including the continuous adjustable output power with high accuracy and stability, is easily obtained. The internal-external modulation control of the laser power based on digital optical feedback can be accomplished with stable power output. At last, the bringing reasons of noise are analyzed and the solving methods are put forward in this paper.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lin Liu, Jun-li Wang, Changyi Zhou, and Wenqi Ge "All-solid-state laser controller design based on digital optical feedback", Proc. SPIE 5629, Lasers in Material Processing and Manufacturing II, (13 January 2005); https://doi.org/10.1117/12.574424
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Control systems

Signal processing

Beam controllers

Digital signal processing

Ferroelectric materials

Feedback control

Modulation

RELATED CONTENT

Generation of medium frequency electrotherapeutic signals
Proceedings of SPIE (August 07 2017)
Method of laser target echo signal identification
Proceedings of SPIE (September 16 2002)
Image stabilization testbed (ISTAT)
Proceedings of SPIE (August 31 2001)
New histogram-based BIST scheme for on-board ADC
Proceedings of SPIE (September 02 2003)
Controlling an ALADDIN 1K x 1K array with Wildfire
Proceedings of SPIE (June 06 1995)

Back to Top