Paper
9 August 2002 Pulsed laser deposition of Y2O3 on Si: characteristics of the interfacial layer
Valentin Craciun, Nabil D. Bassim, Joshua M. Howard, Rajiv K. Singh
Author Affiliations +
Proceedings Volume 4762, ALT'01 International Conference on Advanced Laser Technologies; (2002) https://doi.org/10.1117/12.478619
Event: International Conference on: Advanced Laser Technologies (ALT'01), 2001, Constanta, Romania
Abstract
Thin Y2O3 films were directly grown on (100) Si substrates by the pulsed laser deposition technique. It has been found by high resolution cross-section transmission electron microscopy, x-ray reflectometry and x-ray photoelectron spectroscopy (XPS) that at the interface between Si and the grown layer, an interfacial layer always formed. Depth-profiling and angle-resolved XPS investigations showed that this layer consists of a mixture of substoichiometric SiOx(x<2) and the deposited Y2O3 layer, without forming an yttrium silicate. The thickness of this interfacial layer depended on the oxygen pressure and temperature used during the deposition. The main oxygen source for its formation is the physiosorbed oxygen which is trapped inside the grown layer during the laser ablation process. When the thickness of this low-k SiOx was reduced by decreasing the oxygen pressure during laser ablation below the optimum value, a marked degradation of the electrical properties of the structure was noticed.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Valentin Craciun, Nabil D. Bassim, Joshua M. Howard, and Rajiv K. Singh "Pulsed laser deposition of Y2O3 on Si: characteristics of the interfacial layer", Proc. SPIE 4762, ALT'01 International Conference on Advanced Laser Technologies, (9 August 2002); https://doi.org/10.1117/12.478619
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silicon

Oxygen

Oxides

Interfaces

Pulsed laser deposition

Yttrium

Dielectrics

Back to Top