Paper
6 September 2024 A method for verifying the results of virtual modeling of building structures using fiber-optic technologies
Aydar I. Salikhov, Dmitriy V. Kuznetsov, Akhmet A. Shaymukhametov
Author Affiliations +
Proceedings Volume 13168, Optical Technologies for Telecommunications 2023; 1316818 (2024) https://doi.org/10.1117/12.3026926
Event: Optical Technologies for Telecommunications 2023, 2023, Kazan, Russian Federation
Abstract
This article presents the results of a comparative analysis of isofields and isolines of the distribution of the main tensile stresses, indicating the orientation of the elementary areas of their application in a bendable reinforced concrete slab, obtained using the SCAD Office software package, with the results of an experimental research using fiber-optic sensors based on fiber Bragg gratings (fiber Bragg grating - FBG). The results of modeling and experimental research were obtained with a balanced loading of the slab over the entire surface with free support along the perimeter. A model made of organic glass with isotropic elastic characteristics was considered as the tested sample. The article shows the fabricated experimental setup and presents the results of a survey of sixteen fiber-optic sensors placed on the internal and external surfaces of the tested sample.
(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Aydar I. Salikhov, Dmitriy V. Kuznetsov, and Akhmet A. Shaymukhametov "A method for verifying the results of virtual modeling of building structures using fiber-optic technologies", Proc. SPIE 13168, Optical Technologies for Telecommunications 2023, 1316818 (6 September 2024); https://doi.org/10.1117/12.3026926
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber optics sensors

Fiber Bragg gratings

Sensors

Modeling

Design

Reflection

Deformation

Back to Top