The ComPair balloon instrument is a prototype gamma-ray telescope that aims to further develop technology for observing the gamma-ray sky in the MeV regime. ComPair combines four detector subsystems to enable parallel Compton scattering and pair-production detection, critical for observing in this energy range. This includes a 10 layer double-sided silicon strip detector tracker, a virtual Frisch grid low energy CZT calorimeter, a high energy CsI calorimeter, and a plastic scintillator anti-coincidence detector. The inaugural balloon flight successfully launched from the Columbia Scientific Balloon Facility site in Fort Sumner, New Mexico, in late August 2023, lasting approximately 6.5 hours in duration. In this proceeding, we discuss the development of the ComPair balloon payload, the performance during flight, and early results.
The ComPair gamma-ray telescope is a technology demonstrator for a future gamma-ray telescope called the All-sky Medium Energy Gamma-ray Observatory (AMEGO). The instrument is composed of four subsystems, a double-sided silicon strip detector, a virtual Frisch grid CdZnTe calorimeter, a CsI:Tl based calorimeter, and an anti-coincidence detector (ACD). The CsI calorimeter's goal is to measure the position and energy deposited from high-energy events. To demonstrate the technological readiness, the calorimeter has flown onboard a NASA scientific balloon as part of the GRAPE-ComPair mission and accumulated around 3 hours of float time at an altitude of 40 km. During the flight, the CsI calorimeter observed background radiation, Regener-Pfotzer Maximum, and several gamma-ray activation lines originating from aluminum.
There is a growing interest in the science uniquely enabled by observations in the MeV range, particularly in light of multi-messenger astrophysics. The Compton Pair (ComPair) telescope, a prototype of the AMEGO Probe-class concept, consists of four subsystems that together detect and characterize gamma rays in the MeV regime. A double-sided strip silicon Tracker gives a precise measure of the first Compton scatter interaction and tracks pair-conversion products. A novel cadmium zinc telluride (CZT) detector with excellent position and energy resolution beneath the Tracker detects the Compton-scattered photons. A thick cesium iodide (CsI) calorimeter contains the high-energy Compton and pair events. The instrument is surrounded by a plastic anti-coincidence (ACD) detector to veto the cosmic-ray background. In this work, we will give an overview of the science motivation and a description of the prototype development and performance.
The Gamma RAy Polarimeter Experiment (GRAPE) was first own on a 26-hour balloon flight in the fall of 2011. GRAPE consists of an array of Compton polarimeter modules (based on traditional scintillation technologies) designed to operate in the energy range from 50 keV up to 500 keV. The ultimate goal of our program is to operate GRAPE in a wide FoV configuration for the study of gamma-ray bursts. For the first balloon flight, GRAPE was configured in a collimated mode to facilitate observations of known point sources. The Crab nebula/pulsar, the active Sun, and Cygnus X{1 were the primary targets for the first flight. Polarization results from this flight are summarized. Plans for the next GRAPE balloon flight, which is scheduled to take place in the fall of 2014 from Ft. Sumner, NM, will also be presented. These plans involve modifications designed to improve the polarization sensitivity, including an expansion of the array of polarimeter modules from 16 to 24 and improvements to the instrument shielding. These improvements to the instrument will significantly improve the polarization sensitivity, enabling a measurement of the Crab Nebula polarization to be made during the 2014 balloon flight.
The Gamma RAy Polarimeter Experiment (GRAPE) was first flown on a 26-hour balloon flight in the fall of 2011.
GRAPE consists of an array of Compton polarimeter modules (based on traditional scintillation technologies) designed
to operate in the energy range from 50 keV up to 500 keV. The ultimate goal is to operate GRAPE in a wide FoV
configuration for the study of gamma-ray bursts. For the first (demonstration) balloon flight, GRAPE was configured in
a collimated mode to facilitate observations of known point sources. The Crab nebula/pulsar, the active Sun, and Cygnus
X-1 were the primary targets for the first flight. Although the Crab was detected, the polarization sensitivity was worse
than expected. This paper will review the plans for the next GRAPE balloon flight, which is scheduled to take place in
the fall of 2014 from Ft. Sumner, NM. These plans involve several modifications designed to improve the polarization
sensitivity, including an expansion of the array of polarimeter modules from 16 to 24 and improvements to the
instrument shielding. Sensitivity estimates of the resulting instrument, based on GEANT4 simulations, will be presented.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.