The Advanced X-ray Imaging Satellite (AXIS), a concept recently submitted to NASA’s Astrophysics Probe Explorer competition, will offer low-background, arcsecond-resolution imaging in the 0.3–10 keV band across a 450-arcmin2 field of view, with an effective area at 1 keV of at least 4200 cm2. AXIS will bring X-ray astronomy back to the forefront of modern mainstream astrophysics, reaching equivalent depths in X-rays to many of the major facilities of the 2030’s (e.g., JWST, Roman, Rubin, ngVLA, LISA) to address the most important questions identified by the Astro2020 Decadal Survey. Here, we present an update on the status of AXIS.
The X-Ray Imaging and Spectroscopy Mission (XRISM) project at JAXA officially started in 2018. Following the development of onboard components, the proto-flight test was conducted from 2021 to 2023 at JAXA Tsukuba Space Center. The spacecraft was launched from JAXA Tanegashima Space Center on September 7, 2023 (JST), and onboard components, including the science instruments, were activated during the in-orbit commissioning phase. Following the previous report in 2020, we report the spacecraft ground tests, the launch operation, in-orbit operations, and the status and plan of initial and subsequent guest observations.
The Advanced X-ray Imaging Satellite (AXIS) is a Probe-class concept that will build on the legacy of the Chandra x-ray Observatory by providing low-background, arcsecond-resolution in the 0.3-10 keV band across a 450 arcminute2 field of view, with an order of magnitude improvement in sensitivity. AXIS utilizes breakthroughs in the construction of lightweight segmented x-ray optics using single-crystal silicon, and developments in the fabrication of large-format, small-pixel, high readout rate CCD detectors with good spectral resolution, allowing a robust and cost-effective design. Further, AXIS will be responsive to target-of-opportunity alerts and, with onboard transient detection, will be a powerful facility for studying the time-varying x-ray universe, following on from the legacy of the Neil Gehrels (Swift) x-ray observatory that revolutionized studies of the transient x-ray Universe. In this paper, we present an overview of AXIS, highlighting the prime science objectives driving the AXIS concept and how the observatory design will achieve these objectives.
Supermassive black holes (SMBH) interact with gas in the interstellar and intergalactic media (ISM/IGM) in a process termed “feedback” that is key to the formation and evolution of galaxies and clusters. Characterizing the origins and physical mechanisms governing this feedback requires tracing the propagation of outflowing mass, energy and momentum from the vicinity of the SMBH out to megaparsec scales. Our ability to understand the interplay between feedback and structure evolution across multiple scales, as well as a wide range of other important astrophysical phenomena, depends on diagnostics only available in soft x-ray spectra (10-50 Å). Arcus combines high-resolution, efficient, lightweight x-ray gratings with silicon pore optics to provide R~2500 with an average effective area of ~200 cm2, an order of magnitude larger than the Chandra gratings. Flight-proven CCDs and instrument electronics are strong heritage components, while spacecraft and mission operations also reuse highly successful designs.
The X-Ray Imaging and Spectroscopy Mission (XRISM) is the successor to the 2016 Hitomi mission that ended prematurely. Like Hitomi, the primary science goals are to examine astrophysical problems with precise highresolution X-ray spectroscopy. XRISM promises to discover new horizons in X-ray astronomy. XRISM carries a 6 x 6 pixelized X-ray micro-calorimeter on the focal plane of an X-ray mirror assembly and a co-aligned X-ray CCD camera that covers the same energy band over a large field of view. XRISM utilizes Hitomi heritage, but all designs were reviewed. The attitude and orbit control system were improved in hardware and software. The number of star sensors were increased from two to three to improve coverage and robustness in onboard attitude determination and to obtain a wider field of view sun sensor. The fault detection, isolation, and reconfiguration (FDIR) system was carefully examined and reconfigured. Together with a planned increase of ground support stations, the survivability of the spacecraft is significantly improved.
Arcus provides high-resolution soft X-ray spectroscopy in the 12-50 Å bandpass with unprecedented sensitivity, including spectral resolution < 2500 and effective area < 250 cm2. The three top science goals for Arcus are (1) to measure the effects of structure formation imprinted upon the hot baryons that are predicted to lie in extended halos around galaxies, (2) to trace the propagation of outflowing mass, energy, and momentum from the vicinity of the black hole to extragalactic scales as a measure of their feedback, and (3) to explore how stars form and evolve. Arcus uses the same 12 m focal length grazing-incidence Silicon Pore X-ray Optics (SPOs) that ESA has developed for the Athena mission; the focal length is achieved on orbit via an extendable optical bench. The focused X-rays from these optics are diffracted by high-efficiency Critical-Angle Transmission (CAT) gratings, and the results are imaged with flight-proven CCD detectors and electronics. Combined with the high-heritage NGIS LEOStar-2 spacecraft and launched into 4:1 lunar resonant orbit, Arcus provides high sensitivity and high efficiency observing of a wide range of astrophysical sources.
Arcus, a Medium Explorer (MIDEX) mission, was selected by NASA for a Phase A study in August 2017. The observatory provides high-resolution soft X-ray spectroscopy in the 12-50 Å bandpass with unprecedented sensitivity: effective areas of >350 cm^2 and spectral resolution >2500 at the energies of O VII and O VIII for z=0-0.3. The Arcus key science goals are (1) to measure the effects of structure formation imprinted upon the hot baryons that are predicted to lie in extended halos around galaxies, groups, and clusters, (2) to trace the propagation of outflowing mass, energy, and momentum from the vicinity of the black hole to extragalactic scales as a measure of their feedback and (3) to explore how stars, circumstellar disks and exoplanet atmospheres form and evolve. Arcus relies upon the same 12m focal length grazing-incidence silicon pore X-ray optics (SPO) that ESA has developed for the Athena mission; the focal length is achieved on orbit via an extendable optical bench. The focused X-rays from these optics are diffracted by high-efficiency Critical-Angle Transmission (CAT) gratings, and the results are imaged with flight-proven CCD detectors and electronics. The power and telemetry requirements on the spacecraft are modest. Arcus will be launched into an ~ 7 day 4:1 lunar resonance orbit, resulting in high observing efficiency, low particle background and a favorable thermal environment. Mission operations are straightforward, as most observations will be long (~100 ksec), uninterrupted, and pre-planned. The baseline science mission will be completed in <2 years, although the margin on all consumables allows for 5+ years of operation.
AXIS is a probe-class concept under study for submission to the 2020 Decadal survey. AXIS will extend and enhance the science of high angular resolution x-ray imaging and spectroscopy in the next decade with ∼ 0.3 00 angular resolution over a 70 radius field of view and an order of magnitude more collecting area than Chandra in the 0.3−12 keV band with a cost consistent with a probe. These capabilities are made possible by precision-polished lightweight single-crystal silicon optics achieving both high angular resolution and large collecting area, and next generation small-pixel silicon detectors adequately sampling the point spread function and allowing timing science and preventing pile up with high read-out rate. We have selected a low earth orbit to enable rapid target of opportunity response, similar to Swift, with a high observing efficiency, low detector background and long detector life. The combination opens a wide variety of new and exciting science such as: (1) measuring the event horizon scale structure in AGN accretion disks and the spins of supermassive black holes through observations of gravitationally-microlensed quasars; (ii) determining AGN and starburst feedback in galaxies and galaxy clusters through direct imaging of winds and interaction of jets and via spatially resolved imaging of galaxies at high-z; (iii) fueling of AGN by probing the Bondi radius of over 20 nearby galaxies; (iv) hierarchical structure formation and the SMBH merger rate through measurement of the occurrence rate of dual AGN and occupation fraction of SMBHs; (v) advancing SNR physics and galaxy ecology through large detailed samples of SNR in nearby galaxies; (vi) measuring the Cosmic Web through its connection to cluster outskirts; (vii) a wide variety of time domain science including rapid response to targets of opportunity. With a nominal 2028 launch, AXIS benefits from natural synergies with the ELTs, LSST, ALMA, WFIRST and ATHENA. The AXIS team welcomes input and feedback from the community in preparation for the 2020 Decadal review.
The ASTRO-H mission was designed and developed through an international collaboration of JAXA, NASA, ESA, and the CSA. It was successfully launched on February 17, 2016, and then named Hitomi. During the in-orbit verification phase, the on-board observational instruments functioned as expected. The intricate coolant and refrigeration systems for soft X-ray spectrometer (SXS, a quantum micro-calorimeter) and soft X-ray imager (SXI, an X-ray CCD) also functioned as expected. However, on March 26, 2016, operations were prematurely terminated by a series of abnormal events and mishaps triggered by the attitude control system. These errors led to a fatal event: the loss of the solar panels on the Hitomi mission. The X-ray Astronomy Recovery Mission (or, XARM) is proposed to regain the key scientific advances anticipated by the international collaboration behind Hitomi. XARM will recover this science in the shortest time possible by focusing on one of the main science goals of Hitomi,“Resolving astrophysical problems by precise high-resolution X-ray spectroscopy”.1 This decision was reached after evaluating the performance of the instruments aboard Hitomi and the mission’s initial scientific results, and considering the landscape of planned international X-ray astrophysics missions in 2020’s and 2030’s. Hitomi opened the door to high-resolution spectroscopy in the X-ray universe. It revealed a number of discrepancies between new observational results and prior theoretical predictions. Yet, the resolution pioneered by Hitomi is also the key to answering these and other fundamental questions. The high spectral resolution realized by XARM will not offer mere refinements; rather, it will enable qualitative leaps in astrophysics and plasma physics. XARM has therefore been given a broad scientific charge: “Revealing material circulation and energy transfer in cosmic plasmas and elucidating evolution of cosmic structures and objects”. To fulfill this charge, four categories of science objectives that were defined for Hitomi will also be pursued by XARM; these include (1) Structure formation of the Universe and evolution of clusters of galaxies; (2) Circulation history of baryonic matters in the Universe; (3) Transport and circulation of energy in the Universe; (4) New science with unprecedented high resolution X-ray spectroscopy. In order to achieve these scientific objectives, XARM will carry a 6 × 6 pixelized X-ray micro-calorimeter on the focal plane of an X-ray mirror assembly, and an aligned X-ray CCD camera covering the same energy band and a wider field of view. This paper introduces the science objectives, mission concept, and observing plan of XARM.
The Hitomi (ASTRO-H) mission is the sixth Japanese x-ray astronomy satellite developed by a large international collaboration, including Japan, USA, Canada, and Europe. The mission aimed to provide the highest energy resolution ever achieved at E > 2 keV, using a microcalorimeter instrument, and to cover a wide energy range spanning four decades in energy from soft x-rays to gamma rays. After a successful launch on February 17, 2016, the spacecraft lost its function on March 26, 2016, but the commissioning phase for about a month provided valuable information on the onboard instruments and the spacecraft system, including astrophysical results obtained from first light observations. The paper describes the Hitomi (ASTRO-H) mission, its capabilities, the initial operation, and the instruments/spacecraft performances confirmed during the commissioning operations for about a month.
Arcus, a Medium Explorer (MIDEX) mission, was selected by NASA for a Phase A study in August 2017. The observatory provides high-resolution soft X-ray spectroscopy in the 12-50Å bandpass with unprecedented sensitivity: effective areas of >450 cm2 and spectral resolution >2500. The Arcus key science goals are (1) to measure the effects of structure formation imprinted upon the hot baryons that are predicted to lie in extended halos around galaxies, groups, and clusters, (2) to trace the propagation of outflowing mass, energy, and momentum from the vicinity of the black hole to extragalactic scales as a measure of their feedback and (3) to explore how stars, circumstellar disks and exoplanet atmospheres form and evolve. Arcus relies upon the same 12m focal length grazing-incidence silicon pore X-ray optics (SPO) that ESA has developed for the Athena mission; the focal length is achieved on orbit via an extendable optical bench. The focused X-rays from these optics are diffracted by high-efficiency Critical-Angle Transmission (CAT) gratings, and the results are imaged with flight-proven CCD detectors and electronics. The power and telemetry requirements on the spacecraft are modest. Mission operations are straightforward, as most observations will be long (~100 ksec), uninterrupted, and pre-planned, although there will be capabilities to observe sources such as tidal disruption events or supernovae with a ~3 day turnaround. Following the 2nd year of operation, Arcus will transition to a proposal-driven guest observatory facility.
Arcus will be proposed to the NASA Explorer program as a free-flying satellite mission that will enable high-resolution soft X-ray spectroscopy (8-50) with unprecedented sensitivity – effective areas of >500 sq cm and spectral resolution >2500. The Arcus key science goals are (1) to determine how baryons cycle in and out of galaxies by measuring the effects of structure formation imprinted upon the hot gas that is predicted to lie in extended halos around galaxies, groups, and clusters, (2) to determine how black holes influence their surroundings by tracing the propagation of out-flowing mass, energy and momentum from the vicinity of the black hole out to large scales and (3) to understand how accretion forms and evolves stars and circumstellar disks by observing hot infalling and outflowing gas in these systems. Arcus relies upon grazing-incidence silicon pore X-ray optics with the same 12m focal length (achieved using an extendable optical bench) that will be used for the ESA Athena mission. The focused X-rays from these optics will then be diffracted by high-efficiency off-plane reflection gratings that have already been demonstrated on sub-orbital rocket flights, imaging the results with flight-proven CCD detectors and electronics. The power and telemetry requirements on the spacecraft are modest. The majority of mission operations will not be complex, as most observations will be long (~100 ksec), uninterrupted, and pre-planned, although there will be limited capabilities to observe targets of opportunity, such as tidal disruption events or supernovae with a 3-5 day turnaround. After the end of prime science, we plan to allow guest observations to maximize the science return of Arcus to the community.
The Hitomi (ASTRO-H) mission is the sixth Japanese X-ray astronomy satellite developed by a large international collaboration, including Japan, USA, Canada, and Europe. The mission aimed to provide the highest energy resolution ever achieved at E > 2 keV, using a microcalorimeter instrument, and to cover a wide energy range spanning four decades in energy from soft X-rays to gamma-rays. After a successful launch on 2016 February 17, the spacecraft lost its function on 2016 March 26, but the commissioning phase for about a month provided valuable information on the on-board instruments and the spacecraft system, including astrophysical results obtained from first light observations. The paper describes the Hitomi (ASTRO-H) mission, its capabilities, the initial operation, and the instruments/spacecraft performances confirmed during the commissioning operations for about a month.
Arcus is a NASA/MIDEX mission under development in response to the anticipated 2016 call for proposals. It is a freeflying, soft X-ray grating spectrometer with the highest-ever spectral resolution in the 8-51 Å (0.24 – 1.55 keV) energy range. The Arcus bandpass includes the most sensitive tracers of diffuse million-degree gas: spectral lines from O VII and O VIII, H- and He-like lines of C, N, Ne and Mg, and unique density- and temperature-sensitive lines from Si and Fe ions. These capabilities enable an advance in our understanding of the formation and evolution of baryons in the Universe that is unachievable with any other present or planned observatory. The mission will address multiple key questions posed in the Decadal Survey1 and NASA’s 2013 Roadmap2: How do baryons cycle in and out of galaxies? How do black holes and stars influence their surroundings and the cosmic web via feedback? How do stars, circumstellar disks and exoplanet atmospheres form and evolve? Arcus data will answer these questions by leveraging recent developments in off-plane gratings and silicon pore optics to measure X-ray spectra at high resolution from a wide range of sources within and beyond the Milky Way. CCDs with strong Suzaku heritage combined with electronics based on the Swift mission will detect the dispersed X-rays. Arcus will support a broad astrophysical research program, and its superior resolution and sensitivity in soft X-rays will complement the forthcoming Athena calorimeter, which will have comparably high resolution above 2 keV.
The joint JAXA/NASA ASTRO-H mission is the sixth in a series of highly successful X-ray missions developed by the Institute of Space and Astronautical Science (ISAS), with a planned launch in 2015. The ASTRO-H mission is equipped with a suite of sensitive instruments with the highest energy resolution ever achieved at E > 3 keV and a wide energy range spanning four decades in energy from soft X-rays to gamma-rays. The simultaneous broad band pass, coupled with the high spectral resolution of ΔE ≤ 7 eV of the micro-calorimeter, will enable a wide variety of important science themes to be pursued. ASTRO-H is expected to provide breakthrough results in scientific areas as diverse as the large-scale structure of the Universe and its evolution, the behavior of matter in the gravitational strong field regime, the physical conditions in sites of cosmic-ray acceleration, and the distribution of dark matter in galaxy clusters at different redshifts.
The joint JAXA/NASA ASTRO-H mission is the sixth in a series of highly successful X-ray missions initiated
by the Institute of Space and Astronautical Science (ISAS). ASTRO-H will investigate the physics of the highenergy
universe via a suite of four instruments, covering a very wide energy range, from 0.3 keV to 600 keV.
These instruments include a high-resolution, high-throughput spectrometer sensitive over 0.3–12 keV with
high spectral resolution of ΔE ≦ 7 eV, enabled by a micro-calorimeter array located in the focal plane of
thin-foil X-ray optics; hard X-ray imaging spectrometers covering 5–80 keV, located in the focal plane of
multilayer-coated, focusing hard X-ray mirrors; a wide-field imaging spectrometer sensitive over 0.4–12 keV,
with an X-ray CCD camera in the focal plane of a soft X-ray telescope; and a non-focusing Compton-camera
type soft gamma-ray detector, sensitive in the 40–600 keV band. The simultaneous broad bandpass, coupled
with high spectral resolution, will enable the pursuit of a wide variety of important science themes.
The joint JAXA/NASA ASTRO-H mission is the sixth in a series of highly successful X-ray missions initiated
by the Institute of Space and Astronautical Science (ISAS). ASTRO-H will investigate the physics of the
high-energy universe by performing high-resolution, high-throughput spectroscopy with moderate angular
resolution. ASTRO-H covers very wide energy range from 0.3 keV to 600 keV. ASTRO-H allows a combination
of wide band X-ray spectroscopy (5-80 keV) provided by multilayer coating, focusing hard X-ray
mirrors and hard X-ray imaging detectors, and high energy-resolution soft X-ray spectroscopy (0.3-12 keV)
provided by thin-foil X-ray optics and a micro-calorimeter array. The mission will also carry an X-ray CCD
camera as a focal plane detector for a soft X-ray telescope (0.4-12 keV) and a non-focusing soft gamma-ray
detector (40-600 keV) . The micro-calorimeter system is developed by an international collaboration led
by ISAS/JAXA and NASA. The simultaneous broad bandpass, coupled with high spectral resolution of
ΔE ~7 eV provided by the micro-calorimeter will enable a wide variety of important science themes to be
pursued.
We present the current status of the pre-collimator for the stray-light reduction, mounted on the ASTRO-H
X-Ray Telescopes (XRT). Since the ASTRO-H XRTs adopt the conical approximation of the Wolter-I type
grazing incident optics, X-rays from a source located far from the telescope boresight create a ghost image in the
detector field of view (FOV) as a stray light, and then reduce the signal-to-noise ratio even in the hard X-ray
band. We thus plan to mount the pre-collimator, which is comprised of cylindrical blades aligned with each
primary mirror, onto the XRTs to remove the stray light. While the pre-collimator for the Soft X-ray Telescopes
is designed by the similar principle adopted for the Suzaku pre-collimator, that for the Hard X-ray Telescopes
requires some trade-off studies to select an appropriate blade material. The HXT pre-collimator currently utilizes
the aluminum blade with the 50 mm height and 150 μm thickness. We examined the observational effects by the
hard X-ray (> 10 keV) stray light and the expected performance of the pre-collimator in some scientific cases,
using a ray-tracing simulator. We found that the Galactic center may be mostly covered with the stray light
from the well-known bright X-ray sources. In addition, the flux estimation of the extended X-ray emission such
as the Cosmic X-ray Background is also found to have large (~ 30%) uncertainty due to the stray light from
the outside of the XRT FOV. The pre-collimator improves the situations; the stray light covering the source-free
region in the Galactic center can be reduced by half and the uncertainty of the flux determination for the diffuse
source decreases down to < 10%.
KEYWORDS: X-rays, Sensors, Mirrors, Signal to noise ratio, Spectral resolution, Plasmas, Galaxy groups and clusters, Temperature metrology, Ionization, Iron
Spatially resolved X-ray spectroscopy with high spectral resolution allows the study of astrophysical processes in
extended sources with unprecedented sensitivity. This includes the measurement of abundances, temperatures, densities,
ionisation stages as well as turbulence and velocity structures in these sources. An X-ray calorimeter is planned for the
Russian mission Spektr Röntgen-Gamma (SRG), to be launched in 2011. During the first half year (pointed phase) it will
study the dynamics and composition of of the hot gas in massive clusters of galaxies and in supernova remnants (SNR).
During the survey phase it will produce the first all sky maps of line-rich spectra of the interstellar medium (ISM).
Spectral analysis will be feasible for typically every 5° x 5° region on the sky. Considering the very short time-scale for
the development of this instrument it consists of a combination of well developed systems. For the optics an extra
eROSITA mirror, also part of the Spektr-RG payload, will be used. The detector will be based on spare parts of the
detector flown on Suzaku combined with a rebuild of the electronics and the cooler will be based on the design for the
Japanese mission NeXT. In this paper we will present the science and give an overview of the instrument.
The NeXT (New exploration X-ray Telescope), the new Japanese X-ray Astronomy Satellite following Suzaku,
is an international X-ray mission which is currently planed for launch in 2013. NeXT is a combination of wide
band X-ray spectroscopy (3-80 keV) provided by multi-layer coating, focusing hard X-ray mirrors and hard
X-ray imaging detectors, and high energy-resolution soft X-ray spectroscopy (0.3-10 keV) provided by thin-foil
X-ray optics and a micro-calorimeter array. The mission will also carry an X-ray CCD camera as a focal plane
detector for a soft X-ray telescope and a non-focusing soft gamma-ray detector. With these instruments, NeXT
covers very wide energy range from 0.3 keV to 600 keV. The micro-calorimeter system will be developed by
international collaboration lead by ISAS/JAXA and NASA. The simultaneous broad bandpass, coupled with
high spectral resolution of ΔE ~7 eV by the micro-calorimeter will enable a wide variety of important science
themes to be pursued.
The Micro-X High Resolution Microcalorimeter X-ray Imaging Rocket is sounding rocket experiment that will combine a transition-edge-sensor X-ray-microcalorimeter array with a conical imaging mirror to obtain high-spectral-resolution images of extended and point X-ray sources. Our first target is the Puppis A supernova remnant, which will be observed in January 2011. The Micro-X observation of the bright eastern knot of Puppis A will obtain a line-dominated spectrum with up to 90,000 counts collected in 300 seconds at 2 eV resolution across the 0.3-2.5 keV band. Micro-X will utilize plasma diagnostics to determine the thermodynamic and ionization state of the plasma, to search for line shifts and broadening associated with dynamical processes, and seek evidence of ejecta enhancement. We describe the progress made in developing this payload, including the detector, cryogenics, and electronics assemblies. A detailed modeling effort has been undertaken to design a rocket-bourne adiabatic demagnetization refrigerator with sufficient magnetic shielding to allow stable operation of transition edge sensors, and the associated rocket electronics have been prototyped and tested.
How structures of various scales formed and evolved from the early Universe up to present time is a fundamental
question of astrophysics. EDGE will trace the cosmic history of the baryons from the early generations of massive
stars by Gamma-Ray Burst (GRB) explosions, through the period of galaxy cluster formation, down to the very low
redshift Universe, when between a third and one half of the baryons are expected to reside in cosmic filaments undergoing
gravitational collapse by dark matter (the so-called warm hot intragalactic medium). In addition EDGE, with its
unprecedented capabilities, will provide key results in many important fields. These scientific goals are feasible with a
medium class mission using existing technology combined with innovative instrumental and observational capabilities
by: (a) observing with fast reaction Gamma-Ray Bursts with a high spectral resolution (R ~ 500). This enables the study
of their (star-forming) environment and the use of GRBs as back lights of large scale cosmological structures; (b)
observing and surveying extended sources (galaxy clusters, WHIM) with high sensitivity using two wide field of view
X-ray telescopes (one with a high angular resolution and the other with a high spectral resolution). The mission concept
includes four main instruments: a Wide-field Spectrometer with excellent energy resolution (3 eV at 0.6 keV), a Wide-
Field Imager with high angular resolution (HPD 15") constant over the full 1.4 degree field of view, and a Wide Field
Monitor with a FOV of 1/4 of the sky, which will trigger the fast repointing to the GRB. Extension of its energy response
up to 1 MeV will be achieved with a GRB detector with no imaging capability. This mission is proposed to ESA as part
of the Cosmic Vision call. We will briefly review the science drivers and describe in more detail the payload of this
mission.
Micro-X is a proposed sounding rocket experiment that will combine a transition-edge-sensor X-ray-microcalorimeter array with a conical imaging mirror to obtain high-spectral-resolution images of extended and point X-ray sources. We describe the payload and the science targeted by this mission including the discussion of three possible Micro- X targets: the Puppis A supernova remnant, the Virgo Cluster, and Circinus X-1. For example, a Micro-X observation of the bright eastern knot of Puppis A will obtain a line-dominated spectrum with 90,000 counts collected in 300 seconds at 2 eV resolution across the 0.3-2.5 keV band. Micro-X will utilize plama diagnostics to determine the thermodynamic and ionization state of the plasma, to search for line shifts and broadening associated with dynamical processes, and seek evidence of ejecta enhancement. For clusters of galaxies, Micro-X can uniquely study turbulence and the temperature distribution function. For binaries, Micro-X's high resolution spectra will separate the different processes contributing to the Fe K lines at 6 keV and give a clear view of the geometry of the gas flows and circumstellar gas.
Dark Energy dominates the mass-energy content of the universe (about 73%) but we do not understand it. Most of the remainder of the Universe consists of Dark Matter (23%), made of an unknown particle. The problem of the origin of Dark Energy has become the biggest problem in astrophysics and one of the biggest problems in all of science. The major extant X-ray observatories, the Chandra X-ray Observatory and XMM-Newton, do not have the ability to perform large-area surveys of the sky. But Dark Energy is smoothly distributed throughout the universe and the whole universe is needed to study it. There are two basic methods to explore the properties of Dark Energy, viz. geometrical tests (supernovae) and studies of the way in which Dark Energy has influenced the large scale structure of the universe and its evolution. DUO will use the latter method, employing the copious X-ray emission from clusters of galaxies. Clusters of galaxies offer an ideal probe of cosmology because they are the best tracers of Dark Matter and their distribution on very large scales is dominated by the Dark Energy. In order to take the next step in understanding Dark Energy, viz. the measurement of the 'equation of state' parameter 'w', an X-ray telescope following the design of ABRIXAS will be accommodated into a Small Explorer mission in lowearth orbit. The telescope will perform a scan of 6,000 sq. degs. in the area of sky covered by the Sloan Digital Sky Survey (North), together with a deeper, smaller survey in the Southern hemisphere. DUO will detect 10.000 clusters of galaxies, measure the number density of clusters as a function of cosmic time, and the power spectrum of density fluctuations out to a redshift exceeding one. When combined with the spectrum of density fluctuations in the Cosmic Microwave Background from a redshift of 1100, this will provide a powerful lever arm for the crucial measurement of cosmological parameters.
Recent results from XMM-Newton and Chandra show that sufficiently sensitive x_ray imaging and spectroscopic capabilities allow one to observe the evolution of active galaxies out to z ~ 6, the x-ray signature of luminous star forming galaxies at z~3, as well as the origin and evolution of cosmic structure. With the advent of new optical/UV/IR and radio capabilities in the next decade, it is appropriate to evaluate the future capabilities of planned x-ray missions (e.g., Constellation_X and Astro-E2) as well as other missions being developed (e.g., Gen-X, XEUS, and Astro-G) or under advance planning (MAXIM and EXIST). I will present a summary of the present status of the field and the capabilities of these missions for extragalactic x-ray astronomy.
The x-ray background spectroscopic survey (XBSS) is a SMEX mission proposed to perform a high spectral resolution all-sky survey of diffuse x-ray emission in the 50 - 2000 eV range. This spectral exploration of the x-ray background with high energy resolution will resolve important questions about the role of hot gas in the structure and evolution of the interstellar medium, the Galactic halo, and nearby intergalactic space that cannot be answered in any other way. The temperature distribution, emission measure, ionization distribution, and metallicity of the gases responsible for this emission are unknown. The survey is performed with a 6 by 6 array of cryogenic microcalorimeters that have spectral resolution of approximately 4 eV FWHM. The satellite is spin- stabilized with the spin axis directed toward the sun. The detectors look 90 degrees to the spin axis with a mechanically collimated field of view that is 5 degrees in radius. The instrument scans the entire sky twice in twelve months. During the second survey, deep exposures are performed along selected ecliptic meridians with the span axis fixed for up to 20 days at a time.
We are studying a Next Generation X-ray Observatory, NGXO, that will provide a high resolution spectral capability with large collecting area, at a relatively low cost. The mission consists of two co-aligned telescope systems that provide coverage from 0.3 - 60 keV. One is optimized to cover the 0.3 - 12 keV band with 2 eV spectral resolution using an array of quantum calorimeters with a peak effective area of 2,000 cm2. The spectral resolution will be five times better than the calorimeter planned for Astro-E, with more than a ten-fold increase in effective area over previous high resolution x-ray spectroscopy missions. The second telescope will be the first focusing optics to operate in the 10 - 60 keV energy range, and will have arc minute angular resolution with 500 cm2 collecting area at 30 keV. The sensitivities of the two telescopes are matched to make possible many thousands of high quality x-ray spectral observations, from an available population of more than one million galactic and extragalactic x-ray sources. The NGXO mission is capable of addressing new astrophysical problems which include: determining the mass of a black hole, neutron star, or white dwarf in binary systems from x-ray line radial velocity measurements; determining the 0.3 - 60 keV x-ray spectrum from AGN and determining their contribution to the x-ray background in this energy band; measuring Compton reflection spectra from cold material in accretion driven systems; determining the Hubble constant using resonant line absorption of QSO spectra by rich clusters; searching for a hot 10 million degree intergalactic medium; mapping the dynamics of the intracluster medium; mapping the ionization state, abundance and emission from supernova remnants on a 15 arc second angular scale; and measuring mass motion in stellar flares and the dynamics of accretion flows.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.