Microelectromechanical Systems (MEMS) Deformable Mirrors (DMs) are a key technology option for adaptive optics instruments for space applications because they provide high-precision wavefront control with small form-factor, low-power devices. The Deformable Mirror Demonstration Mission (DeMi) CubeSat demonstrated a MEMS DM in space for the first time in order to raise the Technology Readiness Level (TRL) of the technology for future space applications such as high-contrast imaging of exoplanets and optical communications. The DeMi payload demonstrated a 140-actuator MEMS DM from Boston Micromachines Corporation. DM performance was measured with a Shack Hartmann wavefront sensor (SHWFS). The DeMi CubeSat began on-orbit operations in July 2020 and has since met the mission goals of measuring individual actuator displacements to a precision of 12 nm and correcting wavefront errors in space to <100 nm RMS error. The DeMi mission has raised the TRL of MEMS DM technology from a 5 to a 9. This paper summarizes the DeMi payload design and the results from over a year of on-orbit operations. Individual actuator measurements from ground and space operations show the MEMS DM actuating in space with similar performance and measurement uncertainty to ground data with no dead or under-actuating actuators detected. Wavefront control experiments show the DeMi payload correcting thermal- and vibration-induced wavefront errors in space.
Microelectromechanical systems (MEMS) deformable mirrors (DMs) can provide high-precision wavefront control with a small form-factor, low power device. This makes them a key technology option for future space telescopes requiring adaptive optics for high-contrast imaging of exoplanets with a coronagraph instrument. The Deformable Mirror Demonstration Mission (DeMi) CubeSat payload is a miniature space telescope designed to demonstrate MEMS DM technology in space for the first time. The DeMi payload contains a 50-mm primary mirror, an internal calibration laser source, a 140-actuator MEMS DM from Boston Micromachines Corporation, an image plane wavefront sensor, and a Shack–Hartmann wavefront sensor (SHWFS). The key DeMi payload requirements are to measure individual actuator wavefront displacement contributions to a precision of 12 nm and correct both static and dynamic wavefront errors in space to less than 100-nm RMS error. The DeMi mission will raise the technology readiness level of MEMS DM technology from a five to at least a seven for future space telescope applications. We summarize the DeMi optical payload design, calibration, optical diffraction model, alignment, integration, environmental testing, and preliminary data from in-space operations. Ground testing data show that the DeMi SHWFS can measure individual actuator deflections on the MEMS DM to within 10 nm of interferometric calibration measurements and can meet the 12-nm precision mission requirement for actuator deflection voltages between 0 and 120 V. Payload data from throughout environmental testing show that the MEMS DM and DeMi payload survived environmental testing and provides a valuable baseline to compare with space data. Initial data from space operations show the MEMS DM actuating in space with a median agreement between individual actuator measurements from space and equivalent ground testing data of 12 nm.
The Deformable Mirror Demonstration Mission (DeMi) is a 6U CubeSat that will characterize the on-orbit performance of a Microelectromechanical Systems (MEMS) deformable mirror (DM) with both an image plane wavefront sensor and a Shack-Hartmann wavefront sensor (SHWFS). Coronagraphs on future space telescopes will require precise wavefront control to detect and characterize Earth-like exoplanets. High-actuator count MEMS deformable mirrors can provide wavefront control with low size, weight, and power. The DeMi payload will characterize the on-orbit performance of a 140 actuator MEMS Deformable Mirror (DM) with 5.5 μm maximum stroke, with a goal of measuring individual actuator wavefront displacement contributions to a precision of 12 nm. The payload will be able to measure low order aberrations to λ/10 accuracy and λ/50 precision, and will correct static and dynamic wavefront phase errors to less than 100 nm RMS. We present an overview of the payload design, the assembly, integration, and test process, and report on the development and validation of an optical diffraction model of the payload. Launch is planned for late 2019.
The Epsilon Eridani system is a star system ~10 ly away predicted to be similar to our solar system, making it a particularly interesting target for exoplanet detection. A Jupiter-like exoplanet has been predicted at 1.88 arcsec using radial velocity techniques, and an outer debris disk has been imaged at 35 - 90 AU with Spitzer and CSO observations. We present a preliminary survey of the inner system using the MagAO instrument with the Magellan Clay telescope in Chile. We apply and evaluate the Karhunen-Loeve Image Projection technique, which estimates the point spread function (PSF) of the central star for high-contrast imaging using Principal Component Analysis (PCA). We perform this analysis by adapting the pyKLIP package, which was developed for analyzing data from the Gemini Planet Imager instrument, to be used with data from the MagAO/VisAO instrument.
The nanosatellite optical downlink experiment (NODE) implements a free-space optical communications (lasercom) capability on a CubeSat platform that can support low earth orbit (LEO) to ground downlink rates>10 Mbps. A primary goal of NODE is to leverage commercially available technologies to provide a scalable and cost-effective alternative to radio-frequency-based communications. The NODE transmitter uses a 200-mW 1550-nm master-oscillator power-amplifier design using power-efficient M-ary pulse position modulation. To facilitate pointing the 0.12-deg downlink beam, NODE augments spacecraft body pointing with a microelectromechanical fast steering mirror (FSM) and uses an 850-nm uplink beacon to an onboard CCD camera. The 30-cm aperture ground telescope uses an infrared camera and FSM for tracking to an avalanche photodiode detector-based receiver. Here, we describe our approach to transition prototype transmitter and receiver designs to a full end-to-end CubeSat-scale system. This includes link budget refinement, drive electronics miniaturization, packaging reduction, improvements to pointing and attitude estimation, implementation of modulation, coding, and interleaving, and ground station receiver design. We capture trades and technology development needs and outline plans for integrated system ground testing.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.