KEYWORDS: MATLAB, Device simulation, Field programmable gate arrays, Control systems, Algorithm development, Data communications, Systems modeling, Interfaces, Safety, Digital signal processing
The paper describes the concept and realization of the DOOCS control software for FPGA-based TESLA cavity controller and simulator (SIMCON). It bases on universal software components, created for laboratory purposes and used in MATLAB based control environment. These modules have been recently adapted to the DOOCS environment to ensure a unified software to hardware communication model. The presented solution can be also used as a general platform for control algorithms development. The proposed interfaces between MATLAB and DOOCS modules allow to check the developed algorithm in the operation environment before implementation in the FPGA. As the examples two systems have been presented.
The paper describes design and practical realization of low and high level software for laboratory purposes to control FPGA-based LLRF electronic equipment for TESLA. There is presented a universal solution for particular functional devices of the control system with FPGA chips. The paper describes architecture of software layers and programming solutions of hardware communication based on the proprietary Internal Interface (II) technology. Such a solution was used for the Superconducting Cavity Controller and Simulator (SIMCON) for TESLA experiment (Test Facility) in DESY. The examples of the build and tested software blocks were given in this paper. This documentation is a unity with TESLA Reports published in 2004 by the Elhep and describing the SIMCON hardware, ver.2.0. The paper was
written in a form of a User's Manual.
KEYWORDS: Field programmable gate arrays, MATLAB, Control systems, Free electron lasers, Human-machine interfaces, Computing systems, Data modeling, Chlorine, Chemical elements, Computer architecture
The paper describes design and practical realization of low and high level software for laboratory purposes to control FPGA-based LLRF electronic equipment for TESLA. There is presented a universal solution for particular functional devices of the control system with FPGA chips. The paper describes architecture of software layers and programming solutions of hardware communication based on the proprietary Internal Interface (II) technology. Such a solution was used for the Superconducting Cavity Controller and Simulator (SIMCON) for TESLA experiment (Test Facility) in DESY. The examples of the build and tested software blocks were given in this paper. This documentation is a unity with TESLA Reports published in 2004 by the Elhep and describing the SIMCON hardware, ver.2.0. The paper was written in a form of a User's Manual.
KEYWORDS: MATLAB, Field programmable gate arrays, Control systems, Algorithm development, Device simulation, Digital signal processing, Interfaces, Computer simulations, Telecommunications, Control systems design
The paper describes the concept and realization of the DOOCS control software for FPGA-based TESLA cavity controller and simulator (SIMCON). It bases on universal software components, created for laboratory purposes and used in MATLAB based control environment. These modules have been recently adapted to the DOOCS environment to ensure a unified software to hardware communication model. The presented solution can be also used as a general platform for control algorithms development. The proposed interfaces between MATLAB and DOOCS modules allow to check the developed algorithm in the operation environment before implementation in the FPGA. As the examples two systems have been presented.
FPGA based cavity simulator and controller is the next generation control system dedicated for high performance, low latency control algorithm development and implementation. The usage of FPGA technology gives users possibility to create many devices on one board and easy exchange, modify or improve VHDL programmed algorithms. In order to provide the full functionality of the system to the user, and meet the requirements of flexibility and extensibility, an appropriate control software is needed. This paper describes the idea and implementation of control environment dedicated for FPGA based devices. As an example of implementation, two control environments have been implemented; the laboratory software based on Matlab, and the application for accelerator operation using DOOCS environment.
This document describes aspects of creating software for communication with hardware, especially with FPGA based systems. Features unique for FPGA systems are compared with features of the traditional electronic systems. There are discussed topics like hardware interface definition, or address space description. Connecting client application is shown with Matlab as an example. Solutions with FPGA and embedded processors are discussed.
The paper describes design and practical realization of software for laboratory purposes to control FPGA-based photonic and electronic equipment. There is presented a universal solution for all relevant devices with FPGA chips and gigabit optical links. The paper describes architecture of the software layers and program solutions of hardware communication based on Internal Interface (II) technology. Such a solution was used for superconducting Cavity Controller and Simulator (SIMCON) for the TESLA experiment in DESY (Hamburg). A number of practical examples of the software solutions for the SIMCON system were given in this paper.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.