We present first on-sky performance results of KalAO, the natural guide star adaptive optics imager on the 1.2m Swiss telescope in La Silla, Chile. It is designed to reach at least 30% Strehl in order to detect stellar companions as close as the 150mas in visible-light, at diffraction limit. KalAO was built to search for binarity in planet hosting stars by following-up planet candidates primarily from the TESS satellite survey. The optical design is optimised for the 450 to 900nm wavelength range and is fitted with SDSS griz filters. Wavefront control works down to I-magnitude 10 stars in order to probe the same parameter space as radial velocity instruments such as HARPS and NIRPS. The system first closed the loop on sky in November 2023 and reached diffraction limit imaging in February 2024. It can carry out AO corrected observation of up to 500 targets in one night, with a Strehl ratio of ≈30%.
Precise and accurate wavelength calibration of spectrographs is essential for key science cases, e.g. the search for extrasolar planets, a possible variation of fundamental constants and the direct observation of cosmic expansion.
A crucial tool for this are laser frequency combs (LFCs), directly linking the accuracy of atomic clocks to optical laser lines.
However, strong material dispersion and large spectral separation from the established infrared laser oscillators so far prevent the use of LFCs for spectrograph calibration in the blue and UV part of the spectrum. At OHP/SOPHIE, we demonstrated for the first time the calibration of an astronomical spectrograph using an astrocomb in the ultraviolet spectral range below 400nm. Key technology used were nano-fabricated, periodically-poled waveguides in lithium niobate photonic chips, fed by either a robust infrared electro-optic comb generator or a chip-integrated microresonator comb. In an end-to-end test, we could demonstrate stable and accurate LFC-based spectrograph calibration, showcasing a viable path towards precision wavelength calibration of spectrographs in the ultraviolet, crucial e.g. for the future ELT/ANDES.
Laser frequency combs, producing a dense grid of equidistant optical emission lines, are considered the best calibration sources for precision astronomical spectrographs. The recently commissioned Near-Infra-Red Planet Searcher (NIRPS), operating at the 3.6m telescope in La Silla, Chile, will be equipped with an astrocomb for the wavelength calibration in the 1200nm – 1850nm range. The astrocomb is based on the electro-optic modulation technology and offers tunability of the full optical spectrum.
NIRPS is a fiber-fed AO nIR spectrograph working simultaneously with HARPS at the La Silla-ESO 3.6m telescope. The cryogenic spectrograph operating at 75K employs a cross-dispersed echelle grating (R4), covering a wavelength range of 0.98-1.80 microns in a single image using a Teledyne Hawaii-4RG infrared detector. In early 2022, the NIRPS spectrograph was transported to Chile by plane with all the optical elements mechanically attached to the optical bench inside the vaccum vessel. To ensure the safety of the spectrograph, dedicated work was performed on the shipping crate design, which could survive up to 7g shocks. In La Silla, the vacuum vessel was re-integrated on its support structure and the spectrograph alignment was verified with the H4RG and the injection module. Given the optical design, the alignment phase was performed using a metrology arm and a few optical tests, which minimize the time required for this critical phase. From the validation/technical phase results, two major modifications were required. Firstly, the original grating element was replaced by a new etched crystalline silicon component made by the Fraunhofer Institute for Applied Optics and Precision Engineering. A novel technique was developed to verify the alignment at a warm temperature with the H4RG detector. Secondly, a thermal enclosure was added around the vacuum vessel to optimize thermal stability. Since then, the long-term thermal stability has been better than 0.2mK over 20 days. In this paper, we will review the final spectrograph performances, prior to shipping, and describe the novel techniques developed to minimize shipping costs, AITV phase duration, and grating replacement at the observatory. Additionally, we will discuss the thermal enclosure design to achieve the sub-mK thermal stability.
The Near-InfraRed Planet Searcher or NIRPS is a precision radial velocity spectrograph developed through collaborative efforts among laboratories in Switzerland, Canada, Brazil, France, Portugal and Spain. NIRPS extends to the 0.98-1.8 μm domain of the pioneering HARPS instrument at the La Silla 3.6-m telescope in Chile and it has achieved unparalleled precision, measuring stellar radial velocities in the infrared with accuracy better than 1 m/s. NIRPS can be used either standalone, or simultaneously with HARPS. Commissioned in late 2022 and early 2023, NIRPS embarked on a 5-year Guaranteed Time Observation (GTO) program in April 2023, spanning 720 observing nights. This program focuses on planetary systems around M dwarfs, encompassing both the immediate solar vicinity and transit follow-ups, alongside transit and emission spectroscopy observations. We highlight NIRPS’s current performances and the insights gained during its deployment at the telescope. The lessons learned and successes achieved contribute to the ongoing advancement of precision radial velocity measurements and high spectral fidelity, further solidifying NIRPS’ role in the forefront of the field of exoplanets.
Precision astronomical spectroscopy is vital for seeking life beyond Earth and often relies on detecting very small wavelength shifts over years. Precision of these instruments are ensured by regular wavelength calibration and laser frequency combs stabilized with frequency standards have recently emerged as suitable sources. In this work, we demonstrate wavelength calibration of an astronomical spectrograph in ultraviolet spectrum below 400 nm. This is achieved using second- and third- order nonlinear effects in thin-film, periodically poled lithium niobate waveguides with an infrared electro-optic comb generator at 18 GHz.
NIRPS is a near-infrared (YJH bands), fiber-fed, high-resolution precise radial velocity (PRV) spectrograph installed at the ESO 3.6-m telescope in La Silla, Chile. Using a dichroic, NIRPS will be operated simultaneously with the optical HARPS PRV spectrograph and will be used to conduct ambitious planet-search and characterization surveys. NIRPS aims at detecting and characterizing Earth-like planets in the habitable zone of low-mass dwarfs and obtain high-accuracy transit spectroscopy of exoplanets. The spectrograph is compact for better thermal stability. Using a custom R4 grating in combination with a state-of-the-art Hawaii4RG detector, the instrument provides a high resolution and high stability over the range of 950-1800 nm. This paper focuses on the lens and optomechanical design, assembly, and test of NIRPS’s spectrograph. Some performance tests conducted at Université Laval (Canada) during the integration and at La Silla during commissioning are presented
NIRPS is an infrared precision Radial Velocity (pRV) spectrograph covering the range 950 nm-1800 nm. NIRPS uses a high-order Adaptive Optics (AO) system to couple the starlight into a fiber corresponding to 0.4" on the sky as efficiently or better than HARPS or ESPRESSO couple the light in a 1.0" fiber. This allows the spectrograph to be very compact, more thermally stable, and less costly. Using a custom tan(θ)=4 dispersion grating in combination with a start-of-the-art Hawaii4RG detector makes NIRPS very efficient with complete coverage of the YJH bands at just under 100 000 resolution. On the ESO 3.6-m telescope, NIRPS and HARPS are working simultaneously on the same target, building a single powerful high-resolution, high-fidelity spectrograph covering the 0.37-1.8 µm domain. NIRPS will complement HARPS in validating Earth-like planets found around G and K-type stars whose signal is at the same order of magnitude than the stellar noise. While the telescope-side AO system was installed on the ESO 3.6-m telescope in 2019, the infrared cryogenic spectrograph has been integrated at the telescope in early-2022 and has had first light in June 2022. Results from the first light mission show that NIRPS performs very nicely, that the AO system works up to magnitude I=14.5, that the transmission matches requirements and that the RV stability of 1 m/s is within reach While performance assessment is ongoing, NIRPS has demonstrated on-sky m/s-level stability over a night and <3 m/s level over two weeks. Limitations on the RV performances arise from modal noise that can be mitigated through better scrambling strategies. Better performances are also expected following a grating upgrade in July 2022; these will be tested in late-2022.
NIRPS (Near Infra-Red Planet Searcher) is an AO-assisted and fiber-fed spectrograph for high precision radial velocity measurements in the YJH-bands. NIRPS also has the specificity to be an SCAO assisted instrument, enabling the use of few-mode fibers for the first time. This choice offers an excellent trade-off by allowing to design a compact cryogenic spectrograph, while maintaining a high coupling efficiency under bad seeing conditions and for faint stars. The main drawback resides in a much more important modal-noise, a problem that has to be tackled for allowing 1m/s precision radial velocity measurements. In this paper, we present the NIRPS Front-End: an overview of its design (opto-mechanics, control), its performance on-sky, as well as a few lessons learned along the way.
NIRPS, the Near Infra-Red Planet Searcher, is part of a new generation of Adaptive Optics fibre-fed spectrographs. It will be installed in the ESO La Silla 3.6 m telescope and will be operated individually or jointly with HARPS. NIRPS aims at spectroscopic observations of stellar objects in the NIR, from 970 nm to 1800 nm (with the option for later extension to 2400 nm). The instrument is assisted by an AO system, whose sensing bandwidth will be from 700 nm to 950 nm. Even if telescope pointing and guiding is perfect at a given reference wavelength, atmospheric dispersion will shift the image centroid at different wavelengths, with impact on fibre injection. Moreover such effect will vary during acquisition with the observation zenith angle. Therefore an Atmospheric Dispersion Corrector (ADC) is mandatory to achieve the instrument requirements. In this paper we will present the design, integration and test results for the NIRPS ADC.
NIRPS (Near Infra-Red Planet Searcher) is an AO-assisted and fiber-fed high-resolution spectrograph operating in the YJH-bands at the ESO 3.6m telescope in La Silla Observatory, Chile. The optimal geometrical scrambling and the minimization of the modal noise, requested to reach 1 m s−1 precision in radial velocity, is obtained by combining octagonal fibers, a fiber stretcher, a double-scrambler, and a tip-tilt scanning of the 29-µm fiber core. We tested the performance of the fiber-link design on sky and evaluated the modal noise mitigation via near and far-field images taken at the fiber-link output. Without the inclusion of the stretcher and tip-tilt scanning, an extreme injection position at the edge of the fiber should induce an apparent change in radial velocity of ~20 m s−1 with respect to a well-centered injection. Observations with the entire instrument of fast-rotating hot stars show that the stretcher and tip-tilt scanning significantly reduce the modal noise from 1.6% to 0.7%. Optimizing the tip-tilt scanning pattern can further minimize the modal noise, thereby improving the precision in radial velocity.
HIRES is the high-resolution spectrograph of the European Extremely Large Telescope at optical and near-infrared wavelengths. It consists of three fibre-fed spectrographs providing a wavelength coverage of 0.4-1.8 µm (goal 0.35-2.4 µm) at a spectral resolution of 100,000. The fibre-feeding allows HIRES to have several, interchangeable observing modes including a SCAO module and a small diffraction-limited IFU in the NIR. Therefore, it will be able to operate both in seeing- and diffraction-limited modes. Its modularity will ensure that HIRES can be placed entirely on the Nasmyth platform, if enough mass and volume is available, or part on the Nasmyth and part in the Coud`e room. ELT-HIRES has a wide range of science cases spanning nearly all areas of research in astrophysics and even fundamental physics. Among the top science cases there are the detection of biosignatures from exoplanet atmospheres, finding the fingerprints of the first generation of stars (PopIII), tests on the stability of Nature’s fundamental couplings, and the direct detection of the cosmic acceleration. The HIRES consortium is composed of more than 30 institutes from 14 countries, forming a team of more than 200 scientists and engineers.
KEYWORDS: Spectrographs, Telescopes, Lanthanum, Planets, Spectroscopes, Exoplanets, Aerospace engineering, Space operations, James Webb Space Telescope
NIRPS is a near-infrared (YJH bands), fiber-fed, high-resolution precision radial velocity (pRV) spectrograph currently under construction for deployment at the ESO 3.6-m telescope in La Silla, Chile. Through the use of a dichroic, NIRPS will be operated simultaneously with the optical HARPS pRV spectrograph and will be used to conduct ambitious planet-search and characterization surveys through a 720-night of guaranteed time allocation. NIRPS aims at detecting and characterizing Earth-like planets in the habitable zone of low-mass dwarfs and obtain high-accuracy transit spectroscopy of exoplanets. Here we present a summary of the full performances obtained in laboratory tests conducted at Université Laval (Canada), and the first results of the on-going on-sky commissioning of the front-end. Science operations of NIRPS is expected to start in late-2020, enabling significant synergies with major space and ground instruments such as the JWST, TESS, ALMA, PLATO and the ELT.
NIRPS (Near Infra Red Planet Searcher) is a new ultra-stable infrared ( YJH) fiber-fed spectrograph that will be installed on ESO’s 3.6-m telescope in La Silla, Chile. Aiming at achieving a precision of 1 m/s, NIRPS is designed to find rocky planets orbiting M dwarfs, and will operate together with HARPS (High Accuracy Radial velocity Planet Searcher). In this paper we describe NIRPS science cases, present its main technical characteristics and its development status.
SPIRou is a new near-infrared echelle spectropolarimeter and high precision radial velocity instrument, implemented at the 3.6m Canada-France Hawaii Telescope (CFHT, Mauna Kea) in early 2018. It aims at detecting and characterizing Earth-like planets around M dwarfs and studying stellar and planetary formation in the presence of stellar magnetic field. The calibration unit, with its radial-velocity reference module, is essential to the short- and long-term precision at the level of 1 m/s. We describe the final calibration unit that has been installed. We give technical results such as thermal background level, lamps flux level, lamps stability, and report some technical issues with their solution.
SPIRou is the new high resolution echelle spectropolarimeter and high-precision velocimeter, in the near infra- red, for the 3.6m Canada-France-Hawaii Telescope (CFHT Mauna Kea). This next generation instrument aims at detecting and characterizing Earth-like planets in the habitable zone of low-mass dwarfs and at investigating how magnetic fields impact star and planet formation. SPIRou consists of an achromatic polarimetric module coupled with a fluoride fiber link to a thermally-controlled cryogenic echelle spectrograph, and a Calibration Unit which can fed the light of hollow-cathod lamps, a radial velocity reference (Fabry-Pérot), or a cold source to the polarimeter and/or the spectrograph. Here we present a summary of the full performances obtained in laboratory tests carried in Toulouse (France), and the first results of the on-going commissioning at the CFHT. SPIRou covers a spectral range from 0.96 to 2.48 μm (YJHK domain) in one single exposure at a resolving power of 70 K, providing unpolarized and polarized spectra (with sensitivity 10 ppm) of stars, with a 10 15% peak throughput. Lab tests demonstrate that SPIRou is capable of achieving a relative radial velocity precision better than 0.2 m/s rms on timescales of 24 hr. Science operations of SPIRou are expected to start in 2018 S2, enabling significant synergies with major space and ground instruments such as the JWST, TESS, ALMA and later-on PLATO and the ELT.
We present the results from the phase A study of ELT-HIRES, an optical-infrared High Resolution Spectrograph for ELT, which has just been completed by a consortium of 30 institutes from 12 countries forming a team of about 200 scientists and engineers. The top science cases of ELT-HIRES will be the detection of life signatures from exoplanet atmospheres, tests on the stability of Nature’s fundamental couplings, the direct detection of the cosmic acceleration. However, the science requirements of these science cases enable many other groundbreaking science cases. The baseline design, which allows to fulfil the top science cases, consists in a modular fiber- fed cross-dispersed echelle spectrograph with two ultra-stable spectral arms providing a simultaneous spectral range of 0.4-1.8 μm at a spectral resolution of ~100,000. The fiber-feeding allows ELT-HIRES to have several, interchangeable observing modes including a SCAO module and a small diffraction-limited IFU.
SPIRou is a near-IR (0.98-2.35μm) echelle spectropolarimeter / high precision velocimeter installed at the beginning of the year 2018 on the 3.6m Canada-France-Hawaii Telescope (CFHT) on Mauna Kea, Hawaii, with the main goal of detecting Earth-like planets around low mass stars and magnetic fields of forming stars. In this paper, the fiber links which connects the polarimeter unit to the cryogenic spectrograph unit (35 meter apart) are described. The pupil slicer which forms a slit compatible with the spectrograph entrance specifications is also discussed in this paper. Some challenging aspects are presented. In particular this paper will focus on the manufacturing of 35 meter fibers with a very low loss attenuation (< 13dB/km) in the non-usual fiber spectral domain from 0.98 μm to 2.35 μm. Other aspects as the scrambling performance of the fiber links to reach high accuracy radial velocity measurements (<1m/s) and the performances of the pupil slicer exposed at a cryogenic and vacuum environment will be discussed.
Since 1st light in 2002, HARPS has been setting the standard in the exo-planet detection by radial velocity (RV) measurements[1]. Based on this experience, our consortium is developing a high accuracy near-infrared RV spectrograph covering YJH bands to detect and characterize low-mass planets in the habitable zone of M dwarfs. It will allow RV measurements at the 1-m/s level and will look for habitable planets around M- type stars by following up the candidates found by the upcoming space missions TESS, CHEOPS and later PLATO. NIRPS and HARPS, working simultaneously on the ESO 3.6m are bound to become a single powerful high-resolution, high-fidelity spectrograph covering from 0.4 to 1.8 micron. NIRPS will complement HARPS in validating earth-like planets found around G and K-type stars whose signal is at the same order of magnitude than the stellar noise. Because at equal resolving power the overall dimensions of a spectrograph vary linearly with the input beam étendue, spectrograph designed for seeing-limited observations are large and expensive. NIRPS will use a high order adaptive optics system to couple the starlight into a fiber corresponding to 0.4” on the sky as efficiently or better than HARPS or ESPRESSO couple the light 0.9” fiber. This allows the spectrograph to be very compact, more thermally stable and less costly. Using a custom tan(θ)=4 dispersion grating in combination with a start-of-the-art Hawaii4RG detector makes NIRPS very efficient with complete coverage of the YJH bands at 110’000 resolution. NIRPS works in a regime that is in-between the usual multi-mode (MM) where 1000’s of modes propagates in the fiber and the single mode well suited for perfect optical systems. This regime called few-modes regime is prone to modal noise- Results from a significant R and D effort made to characterize and circumvent the modal noise show that this contribution to the performance budget shall not preclude the RV performance to be achieved.
SPIRou is a near-infrared spectropolarimeter and high precision radial velocity instrument, to be implemented at CFHT in end 2017. It focuses on the search for Earth-like planets around M dwarfs and on the study of stellar and planetary formation in the presence of stellar magnetic field. The calibration unit and the radial-velocity reference module are essential to the short- and long-term precision (1 m/s). We highlight the specificities in the calibration techniques compared to the spectrographs HARPS (at LaSilla, ESO) or SOPHIE (at OHP, France) due to the near-infrared wavelengths, the CMOS detectors, and the instrument design. We also describe the calibration unit architecture, design and production.
The first generation of E-ELT instruments will include an optic-infrared High Resolution Spectrograph, conventionally indicated as EELT-HIRES, which will be capable of providing unique breakthroughs in the fields of exoplanets, star and planet formation, physics and evolution of stars and galaxies, cosmology and fundamental physics. A 2-year long phase A study for EELT-HIRES has just started and will be performed by a consortium composed of institutes and organisations from Brazil, Chile, Denmark, France, Germany, Italy, Poland, Portugal, Spain, Sweden, Switzerland and United Kingdom. In this paper we describe the science goals and the preliminary technical concept for EELT-HIRES which will be developed during the phase A, as well as its planned development and consortium organisation during the study.
N. Crouzet, D. Mékarnia, T. Guillot, L. Abe, A. Agabi, J.-P. Rivet, I. Gonçalves, F.-X. Schmider, J.-B. Daban, Y. Fanteï-Caujolle, C. Gouvret, D. D. Bayliss, G. Zhou, E. Aristidi, T. Fruth, A. Erikson, H. Rauer, J. Szulágyi, E. Bondoux, Z. Challita, C. Pouzenc, F. Fressin, F. Valbousquet, M. Barbieri, A. Blazit, S. Bonhomme, F. Bouchy, J. Gerakis, G. Bouchez
ASTEP (Antarctica Search for Transiting ExoPlanets) is a pilot project that aims at searching and characterizing transiting exoplanets from Dome C in Antarctica and to qualify this site for photometry in the visible. Two instruments were installed at Dome C and ran for six winters in total. The analysis of the collected data is nearly complete. We present the operation of the instruments, and the technical challenges, limitations, and possible solutions in light of the data quality. The instruments performed continuous observations during the winters. Human interventions are required mainly for regular inspection and ice dust removal. A defrosting system is efficient at preventing and removing ice on the mirrors. The PSF FWHM is 4.5 arcsec on average which is 2.5 times larger than the specification, and is highly variable; the causes are the poor ground-level seeing, the turbulent plumes generated by the heating system, and to a lower extent the imperfect optical alignment and focusing, and some astigmatism. We propose solutions for each of these aspects that would largely increase the PSF stability. The astrometric and guiding precisions are satisfactory and would deserve only minor improvements. Major issues are encountered with the camera shutter which did not close properly after two winters; we minimized this issue by heating the shutter and by developing specific image calibration algorithms. Finally, we summarize the site testing and science results obtained with ASTEP. Overall, the ASTEP experiment will serve as a basis to design and operate future optical and near-infrared telescopes in Antarctica.
The current instrumentation plan for the E-ELT foresees a High Resolution Spectrograph conventionally indicated as
HIRES. Shaped on the study of extra-solar planet atmospheres, Pop-III stars and fundamental physical constants, HIRES
is intended to embed observing modes at high-resolution (up to R=150000) and large spectral range (from the blue limit to the K band) useful for a large suite of science cases that can exclusively be tackled by the E-ELT. We present in this
paper the solution for HIRES envisaged by the "HIRES initiative", the international collaboration established in 2013 to
pursue a HIRES on E-ELT.
KEYWORDS: Absorption, Principal component analysis, Stars, Velocimetry, Atmospheric modeling, Absorbance, Planets, Signal attenuation, Telescopes, Chemical species
Optical velocimetry has led to the detection of more than 500 planets to date and there is a strong effort to push m/s velocimetry to the near-infrared to access cooler and lighter stars. The presence of numerous telluric absorption lines in the nIR brings an important challenge. As the star’s barycentric velocity varies through the year, the telluric absorption lines effectively varies in velocity relative to the star’s spectrum by the same amount leading to important systematic RV offsets. We present a novel Principal component analysis-based approach for telluric line subtraction and demonstrated its effectiveness with archival HARPS data for GJ436 and τ Ceti, over parts of the R-band that contain strong telluric absorption lines. The main results are: 1) a better RV accuracy with excluding only a few percentage of the domain, 2) better use of the entire spectrum to measure RV and 3) a higher telescope time efficency by using A0V telluric standard from telescope archive.
SPIRou is a near-IR echelle spectropolarimeter and high-precision velocimeter under construction as a next-
generation instrument for the Canada-France-Hawaii-Telescope. It is designed to cover a very wide simultaneous
near-IR spectral range (0.98-2.35 μm) at a resolving power of 73.5K, providing unpolarized and polarized
spectra of low-mass stars at a radial velocity (RV) precision of 1m/s. The main science goals of SPIRou are
the detection of habitable super-Earths around low-mass stars and the study of stellar magnetism of star at
the early stages of their formation. Following a successful final design review in Spring 2014, SPIRou is now
under construction and is scheduled to see first light in late 2017. We present an overview of key aspects of
SPIRou’s optical and mechanical design.
SPIRou is a near-IR (0.98-2.35μm), echelle spectropolarimeter / high precision velocimeter being designed as a next-generation instrument for the 3.6m Canada-France-Hawaii Telescope on Mauna Kea, Hawaii, with the main goal of
detecting Earth-like planets around low mass stars and magnetic fields of forming stars. The unique scientific and
technical capabilities of SPIRou are described in a series of seven companion papers. In this paper, the fiber links which
connects the polarimeter unit to the cryogenic spectrograph unit (35 meter apart) are described. The pupil slicer which
forms a slit compatible with the spectrograph entrance specifications is also discussed in this paper.
Some challenging aspects are presented. In particular this paper will focus on the manufacturing of 35 meter fibers with a
very low loss attenuation (< 13dB/km) in the non-usual fiber spectral domain from 0.98 μm to 2.35 μm. Other aspects as
the scrambling performance of the fiber links to reach high accuracy radial velocity measurements (1m/s) and the design
of the pupil slicer exposed at a cryogenic and vacuum environment will be discussed.
SPIRou is a near-infrared, echelle spectropolarimeter/velocimeter under design for the 3.6m Canada-France-
Hawaii Telescope (CFHT) on Mauna Kea, Hawaii. The unique scientific capabilities and technical design features
are described in the accompanying papers at this conference. In this paper we focus on the data reduction software
(DRS) and the data simulation tool. The SPIRou DRS builds upon the experience of the existing SOPHIE,
HARPS and ESPADONS spectrographs; class-leaders instruments for high-precision RV measurements and
spectropolarimetry. While SPIRou shares many characteristics with these instruments, moving to the near-
infrared domain brings specific data-processing challenges: the presence of a large number of telluric absorption
lines, strong emission sky lines, thermal background, science arrays with poorer cosmetics, etc. In order for the
DRS to be fully functional for SPIRou's first light in 2015, we developed a data simulation tool that incorporates
numerous instrumental and observational e_ects. We present an overview of the DRS and the simulation tool
architectures.
KEYWORDS: Stars, Calibration, Control systems, Telescopes, Spectrographs, Sensors, Control systems design, Temperature metrology, Optical benches, Lamps
SPIRou is a near-IR (0.98-2.35μm), echelle spectropolarimeter / high precision velocimeter being designed as a nextgeneration
instrument for the 3.6m Canada-France-Hawaii Telescope on Mauna Kea, Hawaii, with the main goals of
detecting Earth-like planets around low-mass stars and magnetic fields of forming stars. The unique scientific and
technical capabilities of SPIRou are described in a series of eight companion papers. In this paper, the means of
controlling the instrument are discussed. Most of the instrument control is fairly normal, using off-the-shelf components
where possible and reusing already available code for these components. Some aspects, however, are more challenging.
In particular, the paper will focus on the challenges of doing fast (50 Hz) guiding with 30 mas repeatability using the
object being observed as a reference and on thermally stabilizing a large optical bench to a very high precision (~1 mK).μ
High-precision spectrographs play a key role in exoplanet searches using the radial velocity technique. But at the
accuracy level of 1 m.s-1, required for super-Earth characterization, stability of fiber-fed spectrograph performance is
crucial considering variable observing conditions such as seeing, guiding and centering errors and, telescope vignetting.
In fiber-fed spectrographs such as HARPS or SOPHIE, the fiber link scrambling properties are one of the main issues.
Both the stability of the fiber near-field uniformity at the spectrograph entrance and of the far-field illumination on the
echelle grating (pupil) are critical for high-precision radial velocity measurements due to the spectrograph geometrical
field and aperture aberrations. We conducted tests on the SOPHIE spectrograph at the 1.93-m OHP telescope to measure
the instrument sensitivity to the fiber link light feeding conditions: star decentering, telescope vignetting by the dome,and
defocussing.
To significantly improve on current precision, we designed a fiber link modification considering the spectrograph
operational constraints. We have developed a new link which includes a piece of octagonal-section fiber, having good
scrambling properties, lying inside the former circular-section fiber, and we tested the concept on a bench to characterize
near-field and far-field scrambling properties.
This modification has been implemented in spring 2011 on the SOPHIE spectrograph fibers and tested for the first time
directly on the sky to demonstrate the gain compared to the previous fiber link. Scientific validation for exoplanet search
and characterization has been conducted by observing standard stars.
One of the remaining limitation of the precise radial velocity instruments is the imperfect scrambling produced by the
circular fibers. We present here experimental studies on new optical fibers aiming at an improvement of the scrambling
they provide. New fibers shapes were tested: square and octagonal. Measurements have been performed of the scrambling
performances of these fibers in the near field as well FRD measurements. These fibers show extremely promising performances
in the near field scrambling: an improvement of a factor 5 to 10 compared to the circular fiber. They however show
some strange behavior in the far field that need to be understood.
S. Perruchot, D. Kohler, F. Bouchy, Y. Richaud, P. Richaud, G. Moreaux, M. Merzougui, R. Sottile, L. Hill, G. Knispel, X. Regal, J.-P. Meunier, S. Ilovaisky, H. Le Coroller, D. Gillet, J. Schmitt, F. Pepe, M. Fleury, D. Sosnowska, P. Vors, D. Mégevand, P. E. Blanc, C. Carol, A. Point, A. Laloge, J.-C. Brunel
SOPHIE is a new fiber-fed echelle spectrograph in operation since October 2006 at the 1.93-m telescope of Observatoire
de Haute-Provence. Benefiting from experience acquired on HARPS (3.6-m ESO), SOPHIE was designed to obtain
accurate radial velocities (~3 m/s over several months) with much higher optical throughput than ELODIE (by a factor of
10). These enhanced capabilities have actually been achieved and have proved invaluable in asteroseismology and
exoplanetology. We present here the optical concept, a double-pass Schmidt echelle spectrograph associated with a high
efficiency coupling fiber system, and including simultaneous wavelength calibration. Stability of the projected spectrum
has been obtained by the encapsulation of the dispersive components in a constant pressure tank. The main
characteristics of the instrument are described. We also give some technical details used in reaching this high level of
performance.
We present results from the first two years of operations of the HARPS spectrograph installed on the ESO 3.6m
telescope at La Silla Observatory, Chile. This instrument, primarily built to detect extrasolar planetary systems, was
designed to achieve the highest radial velocity precision ever, thanks to high mechanical and environmental stability,
stable illumination, accurate wavelength calibration and tracking of instrumental drifts. HARPS has demonstrated a long-term
accuracy at the 1 m s-1 level and below, exploring a new regime in RV precision. We present recent improvements
in the wavelength calibration process, including the creation of a new ThAr reference atlas and the use of a much larger
number of lines to fit the wavelength solution. We have also investigated the intrinsic stability of ThAr calibration lamps
and show that they are able to provide a long-term wavelength reference at or below the 1 m s-1 level. Other instrumental
error sources such as guiding accuracy and photon noise are discussed and a global error budget is presented. These
efforts to further improve the RV precision are also part of a broader study to build a ultra-high accuracy spectrovelocimeter
for the ESO OWL telescope, the CODEX project. The aim of this instrument is to reach an accuracy of 1 cm
s-1 over timescales of at least ten years. This requires to push down the limits of present-day calibration techniques and to
explore new technologies able to provide ultra-precise Doppler measurements.
HARPS is a new high resolution fibre-fed spectrograph dedicated to the
extremely precise measurement of stellar radial velocities. After being used for about one year including the commissioning runs we report a very successful implementation of the measures taken to maximise stability, efficiency and spectral performance. Using the Simultaneous ThAr Reference Method a short term precision of 0.2 m/s during one night and a long term precision of the order of 1 m/s have been achieved. Equipped with a fully automated data reduction pipeline that produces solar system barycentric radial velocities in near real-time, HARPS promises to deliver data of unequalled quality. HARPS will primarily be used for the search for exoplanets and in the field of asteroseismology. First exciting scientific results confirm these expectations.
The high-resolution spectrograph HARPS (High-Accuracy Radial-velocity
Planet Searcher) will be installed on the 3.6m telescope at the ESO La Silla Observatory towards the end of 2002 and offered to the astronomical community by mid-2003. Assembly and integration of the instrument took place at the Geneva Observatory, Switzerland, during Spring 2002. At present, the verification of the system performance is in progress and is already in an advanced phase. We present in this paper the first results of our laboratory tests and describe various performance figures. We stress the outstanding mechanical and thermal stability of the instrument which are crucial for accurate radial velocity measurements. We also give a description of the simultaneous ThAr-reference technique which ensures an overall efficiency 6 times higher than with an the iodine cell absorption
method.
The combination of the high instrumental stability with the simultaneous ThAr-reference technique provides HARPS with characteristics highly adapted for accurate radial-velocity determination at the level of 1 ms-1. These make our instrument suitable for the detection of planetary systems and of extra-solar planets with sub-saturnian mass.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.