Extragalactic Background Light (EBL), the cumulative light from outside the galaxy, is a crucial observational target for understanding the history of the universe. We are developing a CubeSat; VERTECS (Visible Extragalactic background RadiaTion Exploration by CubeSat) with a 6U size (approximately 10 × 20 × 30 cm), equipped with Solar Array Wings (SAW). Our mission is to conduct extensive observations of the visible EBL. The satellite is designed to operate in a sun-synchronous orbit at an altitude of 500-680 km (approximately 15 orbits per day) and observe the EBL on the shadow side to avoid stray light from the Sun and Earth. To observe EBL, a high-performance CMOS sensor, attitude control devices, and high-speed communication equipment X-band are essential. We should note that these components these components consume a significant amount of power. Therefore, some strategic operational plans are necessary to operate this CubeSat within the limited power resources. In addition, VERTECS needs to meet its mission requirements, conducting 10 observations, 4 data downlinks, and 1 command uplink within a day. We have constructed some operational scenarios utilizing attitude control and SAW to meet these requirements, and we also constructed a power budget simulation for VERTECS. In this presentation, we describe how we plan to operate VERTECS utilizing the subsystems and the results of the power simulation during the operation.
The extragalactic background light (EBL) is the integrated emission from out of our Galaxy.Its observation is crucial for revealing the history of star-formation from the early universe to the present epoch. Visible Extragalactic background RadiaTion Exploration by CubeSat (VERTECS) is a 6U astronomical satellite to observe the EBL in visible wavelength from 0.4 µm to 0.8 µm. To observe the EBL, a telescope with 11 lenses and a high-performance CMOS sensor are equipped within 3U volume. The remaining 3U comprises the bus section mainly based on the bus design previously developed at Kyushu Institute of Technology. This paper describes the design and verification processes of the structure and thermal model of the satellite to fulfill the interface and mission requirements. From a mission perspective, the precise attitude and orbit control system unit is mounted on the same interface plate as the telescope to meet stringent pointing stability requirements during observations. The purpose of the stiff design of this interface plate is to minimize structural deformation. Furthermore, integrating multiple external antennas with relatively large X-band and S-band communication units require effective routing harness management. Static stress analysis is performed under the quasistatic loading condition. In addition, modal analysis is also conducted to fulfill the strength and stiffness requirements of the launcher. A series of mechanical environmental tests (shock, random, and sinusoidal vibrations) have been conducted to verify the design and analysis results. The results showed that designed model can fundamentally withstand the launch environment.
We describe scientific objective and project status of an astronomical 6U CubeSat mission VERTECS (Visible Extragalactic background RadiaTion Exploration by CubeSat). The scientific goal of VERTECS is to reveal the star-formation history along the evolution of the universe by measuring the extragalactic background light (EBL) in the visible wavelength. Earlier observations have shown that the near-infrared EBL is several times brighter than integrated light of individual galaxies. As candidates for the excess light, first-generation stars in the early universe or low-redshift intra-halo light have been proposed. Since these objects are expected to show different emission spectra in visible wavelengths, multi-color visible observations are crucial to reveal the origin of the excess light. Since detection sensitivity of the EBL depends on the product of the telescope aperture and the field of view, it is possible to observe it with a small but wide-field telescope system that can be mounted on the limited volume of CubeSat. In VERTECS mission, we develop a 6U CubeSat equipped with a 3U-sized telescope optimized for observation of the visible EBL. The bus system composed of onboard computer, electric power system, communication subsystem, and structure is based on heritage of series of CubeSats developed at Kyushu Institute of Technology in combination with high-precision attitude control subsystem and deployable solar array paddle required for the mission. The VERTECS mission was selected for JAXA-Small Satellite Rush Program (JAXA-SMASH Program), a new program that encourages universities, private companies and JAXA to collaborate to realize small satellite missions utilizing commercial small launch opportunities, and to diversify transportation services in Japan. We started the satellite development in December 2022 and plan to launch the satellite in FY2025.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.