Conventional optical coherence tomography (OCT) systems have working distances of about 25 mm, and require cooperative subjects to immobilize and fixate on a target. Handheld OCT probes have also been demonstrated for successful imaging of pre-term infants and neonates up to ~1 year old. However, no technology yet exists for OCT in young children due to their lack of attention and inherent fear of large objects close to their face. In this work, we demonstrate a prototype retinal swept-source OCT system with a long working distance (from the last optical element to the subject’s eye) to facilitate pediatric imaging. To reduce the footprint and weight of the system compared to the conventional 4f scheme, a novel 2f scanning configuration was implemented to achieve a working distance of 348mm with a +/- 8° scanning angle prior to cornea. Employing two custom-designed lenses, the system design resolution was nearly diffraction limited throughout a -8D to +5D refractive corrections. A fixation target displayed on a LCD monitor and an iris camera were used to facilitate alignment and imaging. Our prototype was tested in consented adult subjects and has the potential to facilitate imaging of young children. With this apparatus, young children could potentially sit comfortably in caretaker’s lap while viewing entertainment on the fixation screen designed to direct their gaze into the imaging apparatus.
While validating our newly developed vision screener based on a double-pass retinal scanning system, we noticed that in all patients the signals from the retina were significantly higher when measurements were performed within a certain time interval referenced to the initial moment when the lights were dimmed and the test subject was asked to fixate on a target. This appeared to be most likely attributable to pupil size dynamics and triggered the present study, whose aim was to assess the pupillary “lights-off” response while fixating on a target in the presence of an accommodative effort. We found that pupil size increases in the first 60 to 70 s after turning off the room lights, and then it decreases toward the baseline in an exponential decay. Our results suggest that there is an optimal time window during which pupil size is expected to be maximal, that is during the second minute after dimming the room lights. During this time, window retinal diagnostic instruments based on double-pass measurement technology should deliver an optimal signal-to-noise ratio. We also propose a mathematical model that can be used to approximate the behavior of the normalized pupil size.
Amblyopia (“lazy eye”) is a major public health problem, caused by misalignment of the eyes (strabismus) or defocus. If detected early in childhood, there is an excellent response to therapy, yet most children are detected too late to be treated effectively. Commercially available vision screening devices that test for amblyopia’s primary causes can detect strabismus only indirectly and inaccurately via assessment of the positions of external light reflections from the cornea, but they cannot detect the anatomical feature of the eyes where fixation actually occurs (the fovea). Our laboratory has been developing technology to detect true foveal fixation, by exploiting the birefringence of the uniquely arranged Henle fibers delineating the fovea using retinal birefringence scanning (RBS), and we recently described a polarization-modulated approach to RBS that enables entirely direct and reliable detection of true foveal fixation, with greatly enhanced signal-to-noise ratio and essentially independent of corneal birefringence (a confounding variable with all polarization-sensitive ophthalmic technology). Here, we describe the design and operation of a new pediatric vision screener that employs polarization-modulated, RBS-based strabismus detection and bull’s eye focus detection with an improved target system, and demonstrate the feasibility of this new approach.
To enhance foveal fixation detection while bypassing the deleterious effects of corneal birefringence in retinal
birefringence scanning (RBS), we developed a new RBS design introducing a double-pass spinning half wave plate
(HWP) and a fixed double-pass retarder into the optical system. Utilizing the measured corneal birefringence from a data
set of 300 human eyes, an algorithm and a related computer program, based on Mueller-Stokes matrix calculus, were
developed in MATLAB for optimizing the properties of both wave plates. Foveal fixation detection was optimized with
the HWP spun 9/16 as fast as the circular scan, with the fixed retarder having a retardance of 45° and fast axis at 90°.
With this new RBS design, a significant statistical improvement of 7.3 times in signal strength, i.e. FFT power, was
achieved for the available data set compared with the previous RBS design. The computer-model-optimized RBS design
has the potential not only for eye alignment screening, but also for remote fixation sensing and eye tracking applications.
For the purpose of vision screening, we develop an eye fixation monitor that detects the fovea by its unique radial orientation of birefringent Henle fibers. Polarized near-infrared light is reflected from the foveal area in a bow-tie pattern of polarization states, similar to the Haidinger brush phenomenon. In contrast to previous devices that used scanning systems, this instrument uses no moving parts. It rather utilizes four spots of linearly polarized light—two aligned with the "bright" arms and two aligned with the "dark" arms—of the bow-tie pattern surrounding the fovea. The light reflected from the fundus is imaged onto a quadrant photodetector, whereby the circular polarization component of the polarization state of each reflected patch of light is measured. The signals from the four photodetectors are amplified, digitized, and analyzed. A normalized differential signal is computed to detect central fixation. The algorithm is tested on a computer model, and the apparatus is tested on human subjects. This work demonstrates the feasibility of a fixation monitor with no moving parts.
Amblyopia is a form of visual impairment caused by ocular misalignment (strabismus) or defocus in an otherwise healthy eye. If detected early, the condition can be fully treated, yet over half of all children with amblyopia under age 5 escape detection. We developed a Pediatric Vision Screener (PVS) to detect amblyopia risk factors. This instrument produces a binocularity score to indicate alignment and a focus score to indicate focus. The purpose of this study is to assess the performance of the PVS by testing adults who were fully cooperative for testing. The study group includes 40 subjects (20 controls, 20 patients) aged 22 to 79 years. 12 patients had constant strabismus (8 to 50), and eight had variable strabismus (12 to 55). All controls had binocularity scores >50%. Binocularity was <50% in 11/12 patients. The patient with binocularity >50% had a well-controlled intermittent exotropia and was not at risk for amblyopia. Focus scores were highly sensitive for good focus but not specific. The PVS shows high sensitivity and specificity for detection of strabismus in adults. Future studies will determine whether this performance can be achieved in preschool children, who are at greatest risk for vision loss.
KEYWORDS: Eye, Sensors, Signal detection, Polarization, Control systems, Mirrors, Birefringence, Semiconductor lasers, Data acquisition, Photodetectors
We develop the Pediatric Vision Screener (PVS) to automatically detect ocular misalignment (strabismus) and defocus in human subjects. The PVS utilizes binocular retinal birefringence scanning to determine when both eyes are aligned, with a theoretical accuracy of <1 deg. The device employs an autoconjugate, bull's-eye detector-based system to detect focus. The focus and alignment pathways are separated by both wavelength and data acquisition timing. Binocular focus and alignment are detected in rapid alternating sequence, measuring both parameters in both eyes in <0.5 sec. In this work, the theory and design of the PVS are described in detail. With objective, automated measurement of both alignment and focus, the PVS represents a new approach to screening children for treatable eye disease such as amblyopia.
We characterize objectively the state of focus of the human eye, utilizing a bull's eye photodetector to detect the double-pass blur produced from a point source of light. A point fixation source of light illuminates the eye. Fundus-reflected light is focused by the optical system of the eye onto a bull's eye photodetector [consisting of an annulus (A) and a center (C) of approximately equal active area]. To generate focus curves, C/A is measured with a range of trial lenses in the light path. Three human eyes and a model eye are studied. In the model eye, the focus curve showed a sharp peak with a full width at half maximum (FWHM) of ±0.25 D. In human eyes, the ratio C/A was >4 at best focus in all cases, with a FWHM of ±1 D. The optical apparatus detects ocular focus (as opposed to refractive error) in real time. A device that can assess focus rapidly and objectively will make it possible to perform low-cost, mass screening for focusing problems such as may exist in children at risk for amblyopia.
We have developed a specialized form of retinal birefringence scanning (RBS), in which a small spot of polarized light is scanned in a circle on the retina, and the returning light is measured for the changes in polarization cuased by the pattern of birefringent fibers that radiate from the fovea. Binocular RBS (BRBS) detects fixation of both eyes simultaneously and thus screens for strabismus, one of the risk factors of amblyopia. We have also developed a technique to automatically detect when the eye is in focus without measuring refractive error. This focus detector utilizes a bull's eye photodetector optically conjugate to a point fixation source. Reflected light is focused back to the point source by the optical system of the eye and if the subject focuses on the fixation source, the returning light will be focused on the detector. We have constructed a hand-held prototype combining BRBS and focus detection measurements in one quick (<0.5 second) and accurate (theoretically detecting ±1° of misalignment) measurement. Here we present our data of BRBS and focus detection signals in a number of normal and amblyopic subjects, demonstrating that this approach can reliably and effectively identify children at risk for amblyopia.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.