We report the investigation of the influence of plasmonic aluminum nanoparticles (Al-NPs), randomly dispersed into the blue organic light-emitting diode (OLED) subject to exciplex emission. The results show that, on the one hand, for the device without Al-NPs, two emission peaks at 437 and 470 nm attributed to excitons of the emitting layer (EML) and exciplexes formed at the hole transport layer/EML interface, respectively. On the other hand, for the device with Al-NPs, the exciplex emission has almost disappeared due to the localized surface plasmonic resonance effect. Moreover, the effective coupling between excitons and localized surface plamson of Al-NPs improved the radiative emission rate of the EML. We observed an enhancement of 50% of the luminous efficiency of the plasmonic-OLED device. In addition to that, the exciton lifetime of the reference sample without metallic nanoparticles is found 1.6 ns, whereas that of the plasmonic sample is prominently decreased to 0.7 ns, emphasizing the plasmonic effect of Al-NPs on the emission of our blue-OLEDs.
We have realized and characterized an optically pumped hybrid photonic crystal (PhC) L3 nanocavity made of an organic material as a gain medium and a Si3N4 two-dimensional PhC. The organic gain medium consists of a guest-host system with tris(8-hydroxyquinolinato) aluminum (Alq3) as the hosting matrix doped with 4-(dicyanomethylene)-2–t-butyl-6(1,1,7,7–tetramethyljulolidyl–9-enyl)-4H-pyran (DCJTB) as a guest. A laser emission at 662 nm with a threshold of 9.3 μJ/cm2 is experimentally observed. The impact of the organic layer thickness on the laser threshold is studied.
In this work we report optical parametric generation in two dimensional, second order periodically poled lithium tantalate crystals. We are particularly interested by angular tuning of the conversion efficiency. We experimentally demonstrate that the generated intensity can be driven by the incidence angle of the pump beam. A double circle construction, different from the conventional Ewald sphere, is adopted to explain the quasi phase matching process.
In this work, we experimentally and theoretically investigate half-wavelength-thick Organic Light Emitting Diode
(OLED) in a vertical microcavity. The latter is based on a quarter-wavelength multilayer mirror on one side and a thin
aluminum semi-transparent layer on the other side. Two key parameters are studied for an optimal design of a cavity-
OLED: the organic layer and the metallic cathode thicknesses. The experimental study shows that a 627 nm peak
emission is obtained for a 127 nm-thick OLED hetero-structure. To achieve both desired optical transmission and
effective electron injection, we investigate the influence of the Al cathode thickness on the performance of the
microcavity devices. The experimental results are compared to those obtained by simulations of the emission spectra
using the transfer matrix method and taking into account the organic emitter position inside the cavity.
In this paper, we report the investigation of two-dimensional organic photonic crystal microcavity laser (2D OPCM). The
gain medium consists of an Alq3:DCJTB layer deposited on a planar Si3N4 photonic crystal microcavity. Both H2 and
L3 photonic crystal cavities are studied in terms of quality factor and the resonance wavelength by 3D FDTD
simulations. The structures are characterized under optical pumping by using a Nd:YAG frequency-tripled laser emitting
at 355 nm with a repetition frequency of 10 Hz and a pulse duration of 6 ns. A laser peak at 652 nm is observed for both
cavities with lasing thresholds of 0.014 nJ and 0.017 nJ for the H2 and the L3 cavities, respectively.
The optical properties of two-dimensional (2D) photonic crystal (PhC) slabs based on self-assembled monolayer of
dielectric microspheres are studied. The in-plane transmission spectra of 2D array of dielectric spheres with triangular
lattice are investigated using the finite-difference-time-domain (FDTD) method. The structures studied are monolayer of
dielectric spheres infiltrated with air ('opals') and air spheres infiltrated with dielectric material ('inverse opals'), with
glass substrate sustaining the monolayer of spheres. The transmission spectra are calculated for different values of
refractive index contrasts between the spheres and the infiltrated material and for different values of filling fractions
(compactness of the spheres). As the refractive index is varied, compact spheres are assumed; and as the filling fraction
is varied, the refractive index of the dielectric spheres or the dielectric matrix is fixed to be 2.5. For compact opal
structure on glass substrate, a narrow photonic band gap (PBG) is observed in the transmission spectra for dielectric
spheres with refractive index higher than around 1.9. When the refractive index is fixed at 2.5, the PBG is observed for
more compact spherical arrangement and disappears for more separated spheres. While for inverse opal structure on
glass substrate, using non-compact spheres enlarges the width of PBG which is not observed for compact spherical
arrangement. The application of the study is to realize organic PhC microcavity laser.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.