20 December 2022 Design of high-brightness, fiber-coupled, beam shaping system based on a multichip 2D green laser diode array
Ziming Liu, Wenbin Qin, Qingxuan Li, Youqiang Liu, Menghua Jiang, Yinhua Cao, Zhiyong Wang
Author Affiliations +
Abstract

Small size, high-brightness fiber-coupled laser modules have always been the ultimate goal that all researchers are pursuing. A high-brightness 525 nm wavelength fiber-coupled system is designed and evaluated. Based on a multichip 2D green laser diode array, fast-axis collimators are set inside the light source, and a beam shaping system that can rearrange the beam and improve the beam quality in both axes is designed. The simulation results indicate that 24 single emitters are coupled into a 50μm / 0.15 NA optical fiber successfully and the output power is 22.55 W. The brightness of 16.25 MW / ( cm2 · sr ) is calculated with fiber coupling efficiency is 97%.

© 2022 Society of Photo-Optical Instrumentation Engineers (SPIE)
Ziming Liu, Wenbin Qin, Qingxuan Li, Youqiang Liu, Menghua Jiang, Yinhua Cao, and Zhiyong Wang "Design of high-brightness, fiber-coupled, beam shaping system based on a multichip 2D green laser diode array," Optical Engineering 61(12), 126104 (20 December 2022). https://doi.org/10.1117/1.OE.61.12.126104
Received: 14 September 2022; Accepted: 28 November 2022; Published: 20 December 2022
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Beam shaping

Optical fibers

Prisms

Design and modelling

Collimation

Light sources

Semiconductor lasers

RELATED CONTENT


Back to Top