30 August 2017 Quantitative evaluation of performance of three-dimensional printed lenses
Author Affiliations +
Abstract
We present an analysis of the shape, surface quality, and imaging capabilities of custom three-dimensional (3-D) printed lenses. 3-D printing technology enables lens prototypes to be fabricated without restrictions on surface geometry. Thus, spherical, aspherical, and rotationally nonsymmetric lenses can be manufactured in an integrated production process. This technique serves as a noteworthy alternative to multistage, labor-intensive, abrasive processes, such as grinding, polishing, and diamond turning. Here, we evaluate the quality of lenses fabricated by Luxexcel using patented Printoptical© technology that is based on an inkjet printing technique by comparing them to lenses made with traditional glass processing technologies (grinding, polishing, etc.). The surface geometry and roughness of the lenses were evaluated using white-light and Fizeau interferometers. We have compared peak-to-valley wavefront deviation, root mean square (RMS) wavefront error, radii of curvature, and the arithmetic roughness average (Ra) profile of plastic and glass lenses. In addition, the imaging performance of selected pairs of lenses was tested using 1951 USAF resolution target. The results indicate performance of 3-D printed optics that could be manufactured with surface roughness comparable to that of injection molded lenses (<inline-formula< <mml:math display="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML"< <mml:mrow< <mml:mi<Ra</mml:mi< <mml:mo<<</mml:mo< <mml:mn<20</mml:mn< <mml:mtext<  </mml:mtext< <mml:mi<nm</mml:mi< </mml:mrow< </mml:math< </inline-formula<). The RMS wavefront error of 3-D printed prototypes was at a minimum 18.8 times larger than equivalent glass prototypes for a lens with a 12.7 mm clear aperture, but, when measured within 63% of its clear aperture, the 3-D printed components’ RMS wavefront error was comparable to glass lenses.
© 2017 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2017/$25.00 © 2017 SPIE
John Gawedzinski, Michal E. Pawlowski, and Tomasz S. Tkaczyk "Quantitative evaluation of performance of three-dimensional printed lenses," Optical Engineering 56(8), 084110 (30 August 2017). https://doi.org/10.1117/1.OE.56.8.084110
Received: 5 April 2017; Accepted: 27 July 2017; Published: 30 August 2017
Lens.org Logo
CITATIONS
Cited by 29 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Lenses

Glasses

3D printing

Prototyping

Optics manufacturing

Polymethylmethacrylate

Printing

RELATED CONTENT

Additive manufacturing approach to 3D printed lenses
Proceedings of SPIE (January 01 1900)
Study of 3D printing method for GRIN micro-optics devices
Proceedings of SPIE (March 14 2016)
Additive manufacturing of tunable lenses
Proceedings of SPIE (February 16 2017)
Assessment of an approach to printed polymer lenses
Proceedings of SPIE (May 11 2017)
Spherical Aberration: Further Fascinating Observations
Proceedings of SPIE (April 13 1989)
Applications Of Ophthalmic Optics
Proceedings of SPIE (June 13 1989)

Back to Top