Comparative study of microlaser excitation thermography and microultrasonic excitation thermography on submillimeter porosity in carbon fiber reinforced polymer composites

Hai Zhang; Henrique C. Fernandes; Ulf Hassler; Clemente Ibarra-Castanedo; Marc Genest; François Robitaille; Simon Joncas; Xavier Maldague

doi:10.1117/1.OE.56.4.041304

30 September 2016 Comparative study of microlaser excitation thermography and microultrasonic excitation thermography on submillimeter porosity in carbon fiber reinforced polymer composites

Hai Zhang, Henrique C. Fernandes, Ulf Hassler, Clemente Ibarra-Castanedo, Marc Genest, François Robitaille, Simon Joncas, Xavier Maldague

Author Affiliations +

Funded by: Consortium for Research and Innovation in Aerospace in Québec (CRIAQ), governments of Québec Bavaria Ministère des Relations Internationales and Ministry of External Affairs through bilateral, Brazilian National Council for Scientific and Technological Development -CNPq

Optical Engineering, Vol. 56, Issue 4, 041304 (September 2016). https://doi.org/10.1117/1.OE.56.4.041304

Abstract

Stitching is used to reduce incomplete infusion of T-joint core (dry-core) and reinforce T-joint structure. However, it may cause new types of flaws, especially submillimeter flaws. Thermographic approaches including microvibrothermography, microlaser line thermography, and microlaser spot thermography on the basis of pulsed and lock-in techniques were proposed. These techniques are used to detect the submillimeter porosities in a stitched T-joint carbon fiber reinforced polymer composite specimen. X-ray microcomputed tomography was used to validate the thermographic results. Finally an experimental comparison of microlaser excitation thermography and microultrasonic excitation thermography was conducted.

Citation Download Citation

Hai Zhang, Henrique C. Fernandes, Ulf Hassler, Clemente Ibarra-Castanedo, Marc Genest, François Robitaille, Simon Joncas, and Xavier Maldague "Comparative study of microlaser excitation thermography and microultrasonic excitation thermography on submillimeter porosity in carbon fiber reinforced polymer composites," Optical Engineering 56(4), 041304 (30 September 2016). https://doi.org/10.1117/1.OE.56.4.041304

Published: 30 September 2016

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE