3 January 2014 Design and analysis of a multi-element dual band infrared detector for counter-countermeasure
Weiguo Sun, Mo Li, Hongxu Chen
Author Affiliations +
Abstract
A dual band multi-element infrared (IR) detector which enables effective target tracking in a complex tactical environment is presented. The photosensitive elements are designed like the stripes of the Lovell optical reticle and arranged close to each other. The thin films of the dual band filter are precisely coated onto an IR transparent substrate, which is then bonded directly onto the surface of photosensitive area with an IR transparent adhesive. The optical system of the detector adopts a spin-scan mode. The filter-detector combination rotates with a mechanical rotor during scanning. The dual band filters temporally encode target location into the incoming radiation signals, and the photosensitive elements then convert the modulated radiation into an electrical signal. The ratio of radiation intensity from two bands can be calculated to distinguish target from IR target-flare mixed signals. Because the pattern of the detector is similar to the Lovell reticle, the detector can also perform spatial filtering to eliminate background noise. In addition, relatively high stability, together with simplicity of the hardware and low cost, indicates that the presented method has a potential application at the field in which precision is not strictly requested.
© 2014 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2014/$25.00 © 2014 SPIE
Weiguo Sun, Mo Li, and Hongxu Chen "Design and analysis of a multi-element dual band infrared detector for counter-countermeasure," Optical Engineering 53(1), 013101 (3 January 2014). https://doi.org/10.1117/1.OE.53.1.013101
Published: 3 January 2014
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Signal detection

Reticles

Target detection

Infrared sensors

Infrared detectors

Multi-element lenses

RELATED CONTENT

The NUC and blind pixel eliminating in the DTDI application
Proceedings of SPIE (December 07 2013)
Multi-element double ring infrared detector based on InSb
Proceedings of SPIE (October 15 2015)
Design and theory analysis of infrared detector
Proceedings of SPIE (March 12 2019)
Two-color infrared missile warning sensors
Proceedings of SPIE (May 10 2005)
Angular Measurement Uncertainty For An Infrared (IR) Sensor
Proceedings of SPIE (December 23 1980)

Back to Top