Resonant biaxial 7-mm MEMS mirror for omnidirectional scanning

Ulrich Hofmann; Mika Aikio; Joachim Janes; Frank Senger; Vanessa Stenchly; Juergen Hagge; Hans-Joachim Quenzer; Manfred Weiss; Thomas von Wantoch; Christian Mallas; Bernhard Wagner; Wolfgang Benecke

doi:10.1117/1.JMM.13.1.011103

2 December 2013 Resonant biaxial 7-mm MEMS mirror for omnidirectional scanning

Ulrich Hofmann, Mika Aikio, Joachim Janes, Frank Senger, Vanessa Stenchly, Juergen Hagge, Hans-Joachim Quenzer, Manfred Weiss, Thomas von Wantoch, Christian Mallas, Bernhard Wagner, Wolfgang Benecke

Author Affiliations +

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 13, Issue 1, 011103 (December 2013). https://doi.org/10.1117/1.JMM.13.1.011103

Abstract

Low-cost automotive laser scanners for environmental perception are needed to enable the integration of advanced driver assistant systems into all automotive vehicle segments, which is a key to reduce the number of traffic accidents on roads. Within the scope of the European-funded project MiniFaros, partners from five different countries have been cooperating in developing a small-sized low-cost time-of-flight-based range sensor. An omnidirectional 360-deg laser scanning concept has been developed based on the combination of an omnidirectional lens and a biaxial large aperture MEMS mirror. The concept, design, fabrication, and first measurement results of a resonant biaxial 7-mm gimbal-less MEMS mirror that is electrostatically actuated by stacked vertical comb drives is described. Identical resonant frequencies of the two orthogonal axes are necessary to enable the required circle scanning capability. A tripod suspension was chosen, since it minimizes the frequency splitting of the two resonant axes. Low-mirror curvature is achieved by a thickness of the mirror of more than 500 μm. Hermetic wafer-level vacuum packaging of such large mirrors based on multiple wafer bonding has been developed to enable a large mechanical tilt angle of ±6.5 deg in each axis. Due to the large targeted tilt angle of ±15 deg and because of the MEMS mirror actuator having a diameter of 10 mm, a cavity depth of about 1.6 mm has been realized.

Citation Download Citation

Ulrich Hofmann, Mika Aikio, Joachim Janes, Frank Senger, Vanessa Stenchly, Juergen Hagge, Hans-Joachim Quenzer, Manfred Weiss, Thomas von Wantoch, Christian Mallas, Bernhard Wagner, and Wolfgang Benecke "Resonant biaxial 7-mm MEMS mirror for omnidirectional scanning," Journal of Micro/Nanolithography, MEMS, and MOEMS 13(1), 011103 (2 December 2013). https://doi.org/10.1117/1.JMM.13.1.011103

Published: 2 December 2013

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE