1 July 2011 Overlay measurements by Mueller polarimetry in back focal plane
Author Affiliations +
Abstract
Angle resolved Mueller polarimetry implemented as polarimetric imaging of a back focal plane of a high NA microscope objective has already demonstrated a good potential for CD metrology. Here we present the experimental and numerical results indicating that this technique may also be competitive for the measurements of overlay error δ. A series of samples of superimposed gratings with well controlled overlay errors have been manufactured and measured with the angle resolved Mueller polarimeter. The overlay targets were 20-μm wide. When the overlay error is δ is equal to 0, absolute values of elements of real 4×4 Mueller matrix M are invariant by matrix transposition. Otherwise this symmetry breaks down. Consequently, we define the following overlay estimator matrix as E = |M||M|<sup>t. The simulations show that matrix element E14 is the most sensitive to the overlay error. The scalar estimator of E14 was calculated by averaging the pixel values over a specifically chosen mask. This estimator is found to vary linearly with δ for overlay values up to 50 nm. Our technique allows entering small overlay marks (down to 5-μm wide). Only one target measurement is needed for each overlay direction. The actual overlay value can be determined without detailed simulation of the structure provided two calibrated overlay structures are available for each direction.
Clément Fallet, Tatiana Novikova, Martin Foldyna, Sandeep Manhas, Bicher Haj Ibrahim, Antonello De Martino, Cyril Vannuffel, and Christophe Constancias "Overlay measurements by Mueller polarimetry in back focal plane," Journal of Micro/Nanolithography, MEMS, and MOEMS 10(3), 033017 (1 July 2011). https://doi.org/10.1117/1.3626852
Published: 1 July 2011
Lens.org Logo
CITATIONS
Cited by 34 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Overlay metrology

Polarimetry

Error analysis

Silicon

Semiconducting wafers

Metrology

Optical testing

RELATED CONTENT


Back to Top