Combined effects of prepulsing and target geometry on efficient extreme ultraviolet production from laser produced plasma experiments and modeling

Ahmed Hassanein; Tatyana Sizyuk; Valeryi A. Sizyuk; Sivanandan S. Harilal

doi:10.1117/1.3609043

1 July 2011 Combined effects of prepulsing and target geometry on efficient extreme ultraviolet production from laser produced plasma experiments and modeling

Ahmed Hassanein, Tatyana Sizyuk, Valeryi A. Sizyuk, Sivanandan S. Harilal

Author Affiliations +

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 10, Issue 3, 033002 (July 2011). https://doi.org/10.1117/1.3609043

Abstract

Laser produced plasmas (LPPs) are currently a promising source of an efficient extreme ultraviolet (EUV) photon source production for advanced lithography. Optimum laser pulse parameters with adjusted wavelength, energy, and duration for a simple planar or spherical tin target can provide 2% to 3% conversion efficiency (CE) in laboratory experiments. Additional effects such as targets with complex geometry and tin-doped targets using prepulsing of laser beams can significantly increase CE. Recent studies showed that such improvements in an LPP system are due to reduction in laser energy losses by decreasing photons transmission (higher harmonic of Nd:yttrium-aluminum-garnet laser) or photons reflection (for CO₂ laser). Optimization of target heating using prepulses or ablating low-density and nanoporous tin oxide can further improve LLP sources by creating more efficient plasma plumes and, as a result, increase CE, the most important parameter for EUV sources. We investigated the combined effects of prepulsing with various parameters and different target geometries on EUV conversion efficiency and on energetic ions production. The much higher reflectivity of CO₂ laser from a tin target leads to two possible ways for system improvement using prepulses with shorter laser wavelengths or using more complex targets geometries with special grooves as developed previously by the authors.

©(2011) Society of Photo-Optical Instrumentation Engineers (SPIE)

Citation Download Citation

Ahmed Hassanein, Tatyana Sizyuk, Valeryi A. Sizyuk, and Sivanandan S. Harilal "Combined effects of prepulsing and target geometry on efficient extreme ultraviolet production from laser produced plasma experiments and modeling," Journal of Micro/Nanolithography, MEMS, and MOEMS 10(3), 033002 (1 July 2011). https://doi.org/10.1117/1.3609043

Published: 1 July 2011

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE