6 May 2016 Mitigation of mask three-dimensional induced phase effects by absorber optimization in ArFi and extreme ultraviolet lithography
Author Affiliations +
Abstract
We will summarize our work on mask topography-induced effects over the last 5 years. We will give a full physical explanation of the effects that can be observed from exposed wafers in state-of-the-art immersion and extreme ultraviolet photolithography. The mask topography-induced phase leads to vertical and lateral displacements of the aerial image, resulting in feature-dependent best focus and position. The feature dependency has been studied for gratings through pitch and size and for two-trench arrangements. The physical explanation involves the analysis and quantification of phase effects in a similar way as was done for projection lens aberrations one decade ago. Phase effects, derived both from rigorous simulations and an analytical model, will be compared with exposure figure or merits (e.g., best focus per feature) and correlate well. Therefore, the analysis of mask topography induced phase and the reduction thereof by absorber thickness optimization can be used to drive lithography improvements.
© 2016 Society of Photo-Optical Instrumentation Engineers (SPIE) 1932-5150/2016/$25.00 © 2016 SPIE
Jo Finders, Laurens de Winter, and Thorsten Last "Mitigation of mask three-dimensional induced phase effects by absorber optimization in ArFi and extreme ultraviolet lithography," Journal of Micro/Nanolithography, MEMS, and MOEMS 15(2), 021408 (6 May 2016). https://doi.org/10.1117/1.JMM.15.2.021408
Published: 6 May 2016
Lens.org Logo
CITATIONS
Cited by 34 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Diffraction

Extreme ultraviolet lithography

3D modeling

Extreme ultraviolet

Lithography

Diffraction gratings

Back to Top