Two-layer critical dimensions and overlay process window characterization and improvement in full-chip computational lithography

John L. Sturtevant; Vlad Liubich; Rachit Gupta

doi:10.1117/1.JMM.15.2.021405

27 April 2016 Two-layer critical dimensions and overlay process window characterization and improvement in full-chip computational lithography

John L. Sturtevant, Vlad Liubich, Rachit Gupta

Author Affiliations +

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 15, Issue 2, 021405 (April 2016). https://doi.org/10.1117/1.JMM.15.2.021405

Abstract

Edge placement error (EPE) was a term initially introduced to describe the difference between predicted pattern contour edge and the design target for a single design layer. Strictly speaking, this quantity is not directly measurable in the fab. What is of vital importance is the relative edge placement errors between different design layers, and in the era of multipatterning, the different constituent mask sublayers for a single design layer. The critical dimensions (CD) and overlay between two layers can be measured in the fab, and there has always been a strong emphasis on control of overlay between design layers. The progress in this realm has been remarkable, accelerated in part at least by the proliferation of multipatterning, which reduces the available overlay budget by introducing a coupling of overlay and CD errors for the target layer. Computational lithography makes possible the full-chip assessment of two-layer edge to edge distances and two-layer contact overlap area. We will investigate examples of via-metal model-based analysis of CD and overlay errors. We will investigate both single patterning and double patterning. For single patterning, we show the advantage of contour-to-contour simulation over contour to target simulation, and how the addition of aberrations in the optical models can provide a more realistic CD-overlay process window (PW) for edge placement errors. For double patterning, the interaction of 4-layer CD and overlay errors is very complex, but we illustrate that not only can full-chip verification identify potential two-layer hotspots, the optical proximity correction engine can act to mitigate such hotspots and enlarge the joint CD-overlay PW.

Citation Download Citation

John L. Sturtevant, Vlad Liubich, and Rachit Gupta "Two-layer critical dimensions and overlay process window characterization and improvement in full-chip computational lithography," Journal of Micro/Nanolithography, MEMS, and MOEMS 15(2), 021405 (27 April 2016). https://doi.org/10.1117/1.JMM.15.2.021405

Published: 27 April 2016

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available