PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
A microelectromechanical deformable mirror device that is optically addressed and designed to
actuate at extremely low-light levels for wavefront error correction is fabricated and theoretically described.
The device consists of an optically transparent substrate, a photoconductive detector, a thin-film resistor,
and insulating posts that support a mirror. The mirror is suspended over the detector by the insulating posts
and is deformed when the detector is illuminated through the substrate. The actuation of the device is theoretically
modeled as a capacitor in series with a photoconductor under an external dc bias. Under an external 6.3 V
dc bias and when back-illuminated with 501 μW∕cm2 light at 539 nm, a total mirror deformation of 474.3 nm was
obtained and substantiated by numerical modeling. This represents the highest actuation sensitivity to date that
results in mirror deflection values in hundreds of nanometers.
Jed Khoury andJarrett Vella Jr.
"Optically addressed deformable mirror for low-light applications," Journal of Micro/Nanolithography, MEMS, and MOEMS 14(4), 041312 (1 October 2015). https://doi.org/10.1117/1.JMM.14.4.041312
Published: 1 October 2015
ACCESS THE FULL ARTICLE
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.