21 May 2012 Extreme-ultraviolet light source development to enable pre-production mask inspection
Matthew Partlow, Matthew Besen, Paul Blackborow, Ron Collins, Deborah Gustafson, Stephen Horne, Donald Smith
Author Affiliations +
Abstract
As extreme-ultraviolet (EUV) lithography moves into pre-production, the requirement for commercially available mask metrology tools becomes more urgent. A key to developing a successful tool is a reliable, high-brightness EUV light source. The Energetiq EQ-10 is a commercially available EUV light source, with an installed base of over 15 sources in the field. The source relies on an electrodeless Z-pinch™ to produce greater than 10 Watts/2Π of 13.5 nm 2% bandwidth light. In order to meet brightness and stability requirements of mask metrology tools, we have investigated modifications to the original design of the EQ-10. The result of these modifications has roughly doubled the source output power, and has achieved brightness greater than 8 Watts/mm2/sr, without sacrificing the spatial and pulse-to-pulse stability of the original design. This level of performance is sufficient for initial mask blank and imaging inspection tools.
© 2012 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2012/$25.00 © 2012 SPIE
Matthew Partlow, Matthew Besen, Paul Blackborow, Ron Collins, Deborah Gustafson, Stephen Horne, and Donald Smith "Extreme-ultraviolet light source development to enable pre-production mask inspection," Journal of Micro/Nanolithography, MEMS, and MOEMS 11(2), 021105 (21 May 2012). https://doi.org/10.1117/1.JMM.11.2.021105
Published: 21 May 2012
Lens.org Logo
CITATIONS
Cited by 8 scholarly publications and 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Extreme ultraviolet

Plasma

Light sources

Metrology

Photomasks

Inspection

Modulators

Back to Top