1 October 2011 Improved secondary electron extraction efficiency model for accurate measurement of narrow-space patterns using model-based library matching
Chie Shishido, Maki Tanaka, Akira Hamamatsu, Tomoharu Nagao
Author Affiliations +
Abstract
In order to accurately measure narrow-space patterns, we propose an improved secondary-electron extraction efficiency model for the model-based library method. In the conventional model, the same extraction efficiency is applied to all electrons, regardless of from where the electrons are emitted. This is a simplified model that assumes a uniform extraction electric-field strength. In the improved model, the extraction efficiency is calculated as a function of the pattern shape and the emission position of the electrons. The function is based on simulation results for the electric-field strength of critical-dimension scanning electron microscopy (SEM) optics. We verify the effectiveness of the improved extraction model by applying this model to measurements of actual patterns with space widths in the (20 to 30) nm range. The measurement bias of the sidewall angle (SWA) is evaluated through comparison to cross-sectional SEM measurements. We demonstrate that the average SWA bias is improved from 0.8 deg for the conventional model to 0.04 deg for the improved model.
©(2011) Society of Photo-Optical Instrumentation Engineers (SPIE)
Chie Shishido, Maki Tanaka, Akira Hamamatsu, and Tomoharu Nagao "Improved secondary electron extraction efficiency model for accurate measurement of narrow-space patterns using model-based library matching," Journal of Micro/Nanolithography, MEMS, and MOEMS 10(4), 043017 (1 October 2011). https://doi.org/10.1117/1.3664410
Published: 1 October 2011
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Scanning electron microscopy

Model-based design

Calibration

Monte Carlo methods

Cadmium

Mathematical modeling

3D metrology

Back to Top