Coordinate metrology of a primary surface composite panel from the Large Millimeter Telescope

David M. Gale; Maribel Lucero Álvarez; Lizeth Cabrera Cuevas; Andrea Leon-Huerta; Edgar Arizmendi Reyes; Octavio Icasio Hernández; David Castro Santos; Emilio Hernández Ríos; Esteban Tecuapetla Sosa; Carlos Tzile Torres; Miguel Viliesid Alonso

doi:10.1117/12.2233892

22 July 2016 Coordinate metrology of a primary surface composite panel from the Large Millimeter Telescope

David M. Gale, Maribel Lucero Álvarez, Lizeth Cabrera Cuevas, Andrea Leon-Huerta, Edgar Arizmendi Reyes, Octavio Icasio Hernández, David Castro Santos, Emilio Hernández Ríos, Esteban Tecuapetla Sosa, Carlos Tzile Torres, Miguel Viliesid Alonso

Author Affiliations +

Proceedings Volume 9912, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation II; 991211 (2016) https://doi.org/10.1117/12.2233892
Event: SPIE Astronomical Telescopes + Instrumentation, 2016, Edinburgh, United Kingdom

Abstract

The Large Millimeter Telescope (LMT) is a single-dish fully-steerable radio telescope presently operating with a 32.5 m parabolic primary reflector, in the process of extension to 50 m. The project is managed by the Instituto Nacional de Astrofísica, Óptica y Electrónica (INAOE) in México, and the University of Massachusetts Amherst, USA. A laminated surface panel from the LMT primary reflector has been subjected to a surface measurement assay at Mexico’s National Metrology Center (CENAM). Data obtained using a coordinate measuring machine and laser tracker owned by CENAM is compared with measurements using an identical model laser tracker and the photogrammetry technique, the latter systems owned and operated by the LMT. All measurements were performed within the controlled metrology environment at CENAM. The measurement exercise is intended to prepare the groundwork for converting this spare surface panel into a calibrated work-piece. The establishment of a calibrated work-piece provides quality assurance for metrology through measurement traceability. It also simplifies the evaluation of measurement uncertainty for coordinate metrology procedures used by the LMT project during reflector surface qualification.

Citation Download Citation

David M. Gale, Maribel Lucero Álvarez, Lizeth Cabrera Cuevas, Andrea Leon-Huerta, Edgar Arizmendi Reyes, Octavio Icasio Hernández, David Castro Santos, Emilio Hernández Ríos, Esteban Tecuapetla Sosa, Carlos Tzile Torres, and Miguel Viliesid Alonso "Coordinate metrology of a primary surface composite panel from the Large Millimeter Telescope", Proc. SPIE 9912, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation II, 991211 (22 July 2016); https://doi.org/10.1117/12.2233892

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE