Glued structures inspection based on lock-in thermography

Laetitia Perez; Laurent Autrique

doi:10.1117/12.2185131

30 April 2015 Glued structures inspection based on lock-in thermography

Laetitia Perez, Laurent Autrique

Proceedings Volume 9534, Twelfth International Conference on Quality Control by Artificial Vision 2015; 95341K (2015) https://doi.org/10.1117/12.2185131
Event: The International Conference on Quality Control by Artificial Vision 2015, 2015, Le Creusot, France

Abstract

Active thermography is a widely employed technique for parametric identification and non-destructive inspection. This attractive method is based on the observation of thermal waves propagation induced by a periodic heating. For nondestructive testing usual approaches are based on a global heating (a large surface of the inspected material is submitted to thermal excitation). In the following a local approach is investigated: the heated area is small (order of magnitude is one square centimeter) and lateral propagation is studied in order to reveal the defect in the sample. In fact, both modulus (heat wave amplitude) and phase lag (delay) of the measured periodic signal are modified by the defect neighborhood and the search for the most effective area leads to the defect localization. Several results are highlighted in this communication in order to investigate an automated procedure. Temperatures are measured by an infrared camera and analyses of modulus cartography are performed in order to estimate the defect location. In such an aim, the downhill simplex method is implemented in order to converge toward defect location. Illustrations are dedicated to glued structures (two plates separated by a thin glue interface) for which unknown defect is a lack of glue which can be considered as a bubble (air trapped between the lower and the upper plane surface). Automated method attractiveness is established in several configurations.

Citation Download Citation

Laetitia Perez and Laurent Autrique "Glued structures inspection based on lock-in thermography", Proc. SPIE 9534, Twelfth International Conference on Quality Control by Artificial Vision 2015, 95341K (30 April 2015); https://doi.org/10.1117/12.2185131

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
7 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Cartography

Inspection

Wave propagation

Adhesives

Thermography

Glasses

Interfaces

Show All Keywords

Keywords/Phrases

Search In:

Publication Years