Paper
4 March 2015 Experimental study of leadscrew stresses in-service by digital image correlation
Terry Yuan-Fang Chen, Ssu-Yu Chen
Author Affiliations +
Proceedings Volume 9302, International Conference on Experimental Mechanics 2014; 93021B (2015) https://doi.org/10.1117/12.2084895
Event: International Conference on Experimental Mechanics 2014, 2014, Singapore, Singapore
Abstract
Leadscrew is used to translate turning motion into linear motion. The alternative stress is happening during the motion, and fatigue may happen when the leadscrew undergoes reciprocating motion.The purpose of this study is to measure the deformation of leadscrew in-service by digital image correlation method (DIC) for fatigue failure evaluation. The leadscrew was undergoing reciprocating motion, and the deformed leadscrew images were captured by a CCD camera. Full-field strain of the deformed leadscrew was obtained by using digital image correlation, and to further obtain the full-field stress. The deformation at several points were examined. The results show that at the points of concentrated stress, the maximun Von Mises stress is about four times bigger than that at the other points, and fatigue may be occured.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Terry Yuan-Fang Chen and Ssu-Yu Chen "Experimental study of leadscrew stresses in-service by digital image correlation", Proc. SPIE 9302, International Conference on Experimental Mechanics 2014, 93021B (4 March 2015); https://doi.org/10.1117/12.2084895
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Digital image correlation

CCD cameras

Computing systems

Imaging systems

Digital filtering

Failure analysis

Interferometry

Back to Top