Mold production for polymer optics

Rainer Boerret; Jonas Raab; Marco Speich

doi:10.1117/12.2060670

25 September 2014 Mold production for polymer optics

Rainer Boerret, Jonas Raab, Marco Speich

Author Affiliations +

Proceedings Volume 9192, Current Developments in Lens Design and Optical Engineering XV; 91921L (2014) https://doi.org/10.1117/12.2060670
Event: SPIE Optical Engineering + Applications, 2014, San Diego, California, United States

Abstract

The fields of application for polymer optics are huge and thus the need for polymer optics is steadily growing. Most polymer optics are produced in high numbers by injection molding. Therefore molds and dies that fulfill special requirements are needed. Polishing is usually the last process in the common process chain for production of molds for polymer optics. Usually this process step is done manually by experienced polishers. Due to the small number of skilled professionals and health problems because of the monotonous work the idea was to support or probably supersede manual polishing. Polishing using an industrial robot as movement system enables totally new possibilities in automated polishing. This work focuses on the surface generation with a newly designed polishing setup and on the code generation for the robot movement. The process starts on ground surfaces and with different tools and polishing agents surfaces that fulfill the requirements for injection molding of optics can be achieved. To achieve this the attention has to be focused not only on the process itself but also on tool path generation. A proprietary software developed in the Centre for Optical Technologies in Aalen University allows the tool path generation on almost any surface. This allows the usage of the newly developed polishing processes on different surfaces and enables an easy adaption. Details of process and software development will be presented as well as results from different polishing tests on different surfaces.

Citation Download Citation

Rainer Boerret, Jonas Raab, and Marco Speich "Mold production for polymer optics", Proc. SPIE 9192, Current Developments in Lens Design and Optical Engineering XV, 91921L (25 September 2014); https://doi.org/10.1117/12.2060670

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE