High-power dense wavelength division multiplexing (HP-DWDM) of frequency stabilized 9xx diode laser bars with a channel spacing of 1.5 nm

Stefan Hengesbach; Carlo Holly; Niels Krauch; Ulrich Witte; Thomas Westphalen; Martin Traub; Dieter Hoffmann

doi:10.1117/12.2036974

7 March 2014 High-power dense wavelength division multiplexing (HP-DWDM) of frequency stabilized 9xx diode laser bars with a channel spacing of 1.5 nm

Stefan Hengesbach, Carlo Holly, Niels Krauch, Ulrich Witte, Thomas Westphalen, Martin Traub, Dieter Hoffmann

Author Affiliations +

Proceedings Volume 8965, High-Power Diode Laser Technology and Applications XII; 89650C (2014) https://doi.org/10.1117/12.2036974
Event: SPIE LASE, 2014, San Francisco, California, United States

Abstract

We present a compact High-Power DenseWavelength Division Multiplexer (HP-DWDM) based on Volume Bragg Gratings (VBGs) for spectrally stabilized diode lasers with a low average beam quality M² ≤50. The center wavelengths of the five input channels with a spectral spacing of 1.5 nm are 973 nm, 974.5 nm, 976 nm, 977.5 nm and 979 nm. Multiplexing efficiencies of 97%±2% have been demonstrated with single mode, frequency stabilized laser radiation. Since the diffraction efficiency strongly depends on the beam quality, the multiplexing efficiency decreases to 94% (M² = 25) and 85%±3% (M² = 45) if multimode radiation is overlaid. Besides, the calculated multiplexing efficiency of the radiation with M² = 45 amounts to 87:5 %. Thus, calculations and measurements are in good agreement. In addition, we developed a dynamic temperature control for the multiplexing VBGs which adapts the Bragg wavelengths to the diode laser center wavelengths. In short, the prototype with a radiance of 70GWm^-2 sr^-1 consists of five spectrally stabilized and passively cooled diode laser bars with 40Woutput after beam transformation. To achieve a good stabilization performance ELOD (Extreme LOw Divergence) diode laser bars have been chosen in combination with an external resonator based on VBGs. As a result, the spectral width defined by 95% power inclusion is < 120pm for each beam source across the entire operating range from 30 A to 120 A. Due to the spectral stabilization, the output power of each bar decreases in the range of < 5 %.

Citation Download Citation

Stefan Hengesbach, Carlo Holly, Niels Krauch, Ulrich Witte, Thomas Westphalen, Martin Traub, and Dieter Hoffmann "High-power dense wavelength division multiplexing (HP-DWDM) of frequency stabilized 9xx diode laser bars with a channel spacing of 1.5 nm", Proc. SPIE 8965, High-Power Diode Laser Technology and Applications XII, 89650C (7 March 2014); https://doi.org/10.1117/12.2036974

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE