Influence of data volume and EPC on process window in massively parallel e-beam direct write

Shy-Jay Lin; Pei-Yi Liu; Cheng-Hung Chen; Wen-Chuan Wang; Jaw-Jung Shin; Burn Jeng Lin; Mark A. McCord; Sameet K. Shriyan

doi:10.1117/12.2010865

26 March 2013 Influence of data volume and EPC on process window in massively parallel e-beam direct write

Shy-Jay Lin, Pei-Yi Liu, Cheng-Hung Chen, Wen-Chuan Wang, Jaw-Jung Shin , Burn Jeng Lin, Mark A. McCord, Sameet K. Shriyan

Author Affiliations +

Proceedings Volume 8680, Alternative Lithographic Technologies V; 86801C (2013) https://doi.org/10.1117/12.2010865
Event: SPIE Advanced Lithography, 2013, San Jose, California, United States

Abstract

Multiple e-beam direct write lithography (MEBDW), using >10,000 e-beams writing in parallel, proposed by MAPPER, KLA-Tencor, and IMS is a potential solution for 20-nm half-pitch and beyond. The raster scan in MEBDW makes bitmap its data format. Data handling becomes indispensable since bitmap needs a huge data volume due to the fine pixel size to keep the CD accuracy after e-beam proximity correction (EPC). In fact, in 10,000-beam MEBDW, for a 10 WPH tool of 1-nm pixel size and 1-bit gray level, the aggregated data transmission rate would be up to 1963 Tera bits per second (bps), requiring 19,630 fibers transmitting 10 Gbps in each fiber. The data rate per beam would be <20 Gbps. Hence data reduction using bigger pixel size, fewer grey levels to achieve sub-nm EPC accuracy, and data truncation have been extensively studied. In this paper, process window assessment through Exposure-Defocus (E-D) Forest to quantitatively characterize the data truncation before and after EPC is reported. REBL electron optics, electron scattering in resist, and resist acid diffusion are considered, to construct the E-D Forest and to analyze the imaging performance of the most representative layers and patterns, such as critical line/space and hole layers with minimum pitch, cutting layers, and implant layers, for the 10-nm, and 7-nm nodes.

Citation Download Citation

Shy-Jay Lin, Pei-Yi Liu, Cheng-Hung Chen, Wen-Chuan Wang, Jaw-Jung Shin , Burn Jeng Lin, Mark A. McCord, and Sameet K. Shriyan "Influence of data volume and EPC on process window in massively parallel e-beam direct write", Proc. SPIE 8680, Alternative Lithographic Technologies V, 86801C (26 March 2013); https://doi.org/10.1117/12.2010865

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available