Paper
17 October 2012 All-fiber acceleration sensor with temperature self-compensation
Author Affiliations +
Proceedings Volume 8421, OFS2012 22nd International Conference on Optical Fiber Sensors; 84210X (2012) https://doi.org/10.1117/12.970387
Event: OFS2012 22nd International Conference on Optical Fiber Sensor, 2012, Beijing, China
Abstract
An all-fiber accelerometer with temperature self-compensation based on Fabry-Pérot interferometer (FPI) and simple-supported beam is proposed, where the two reflectors are the joint face between single mode fiber (SMF) and hollow core fiber and the end face of the micro fiber used as vibration beam, respectively. The temperature effect could be compensated by choosing proper material for the beam because it is movable in the FPI cavity. When the beam length composed of SMF is 6 cm and the mass block is ~1.3218×10-7 Kg, the acceleration sensitivity is ~0.35 V/g and the temperature sensitivity is less than 1pm/°C;.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tao Zhu, Qiang Zhang, Leilei Shi, Yusong Hou, and Xiaoyi Bao "All-fiber acceleration sensor with temperature self-compensation", Proc. SPIE 8421, OFS2012 22nd International Conference on Optical Fiber Sensors, 84210X (17 October 2012); https://doi.org/10.1117/12.970387
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Single mode fibers

Microelectromechanical systems

Quartz

Temperature metrology

Fiber optics sensors

Interferometers

Back to Top