Paper
24 October 2012 Bonding of optical materials by femtosecond laser welding for aerospace and high power laser applications
D. Hélie, F. Lacroix, R. Vallée
Author Affiliations +
Proceedings Volume 8412, Photonics North 2012; 841210 (2012) https://doi.org/10.1117/12.2010265
Event: Photonics North 2012, 2012, Montréal, Canada
Abstract
A process for joining optical materials by direct bonding reinforced by femtosecond laser welding is presented. It is suitable for assembly of components for aerospace and high power laser applications where adhesives must be avoided. Joining is realized in two steps. Firstly, materials are direct bonded so as to achieve a state of optical contact preferably over the whole area between bonded surfaces. The second step consists in sealing the direct bonded region by writing weld lines by femtosecond laser pulses at the outskirts of the bonding surface. The bond, applicable to both similar and dissimilar material combinations, is resistant to important mechanical and thermal constraints and does not alter the assembly’s optical transmission properties inside the sealed area. Most importantly, the drawbacks of common joining methods are avoided, such as premature aging, degassing, photo-bleaching and limited applicable material combinations.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
D. Hélie, F. Lacroix, and R. Vallée "Bonding of optical materials by femtosecond laser welding for aerospace and high power laser applications", Proc. SPIE 8412, Photonics North 2012, 841210 (24 October 2012); https://doi.org/10.1117/12.2010265
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Femtosecond phenomena

Resistance

Laser welding

Silica

Aerospace engineering

Adhesives

Laser bonding

Back to Top