Silver and silver / polystyrene coated hollow glass waveguides for the transmission of visible and infrared radiation

Carlos M. Bledt; James A. Harrington

doi:10.1117/12.912198

1 February 2012 Silver and silver / polystyrene coated hollow glass waveguides for the transmission of visible and infrared radiation

Carlos M. Bledt, James A. Harrington

Author Affiliations +

Proceedings Volume 8218, Optical Fibers and Sensors for Medical Diagnostics and Treatment Applications XII; 821809 (2012) https://doi.org/10.1117/12.912198
Event: SPIE BiOS, 2012, San Francisco, California, United States

Abstract

This study involves the optimization of thin silver coated Hollow Glass Waveguides (HGWs) for low-loss delivery of laser radiation at visible wavelengths and discusses preliminary work in the development of polystyrene dielectric thin films in silver coated HGWs for low-loss radiation delivery at near and far infrared wavelengths. The optimization of the silver thin film deposition procedure in HGWs for reduced transmission losses at λ = 500 - 1050 nm is presented along with experimental results. Such low-loss hollow waveguides are capable of delivering high power / high energy laser light with no functional damage. The benefits and use of novel polystyrene thin films in HGWs is likewise presented and preliminary experimental results are discussed along with potential applications of said polystyrene coated waveguides. Polystyrene is an attractive material for use as a dielectric thin film in HGWs due to its relatively low refractive index nearing the optimal refractive index of n = 1.414 for use as a single dielectric thin film in HGWs. Furthermore, its nontoxicity, low cost, and chemical inertness add to its beneficial use as a transparent thin film at visible and infrared wavelengths ranging from λ = 500 - 3,000 nm and λ > 50 μm. Its broadband transparency additionally allows for its simultaneous use as a dielectric film in HGWs at infrared and visible wavelengths. Preliminary results in the development of polystyrene coated HGWs optimized for transmission at short and long wavelengths are presented, primarily through FTIR spectroscopic methods. The design for the optimization of deposited polystyrene thin films in HGWs based on desired transmission wavelength range is discussed.

Citation Download Citation

Carlos M. Bledt and James A. Harrington "Silver and silver / polystyrene coated hollow glass waveguides for the transmission of visible and infrared radiation", Proc. SPIE 8218, Optical Fibers and Sensors for Medical Diagnostics and Treatment Applications XII, 821809 (1 February 2012); https://doi.org/10.1117/12.912198

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available