Paper
20 April 2011 Wafer quality analysis of various scribe line mark designs
Jianming Zhou, Craig Hickman, Yuan He, Scott Light, Lucas Lamonds, Anton deVilliers
Author Affiliations +
Abstract
Scribe Line Marks (SLM) printed on substrates are a standard method used by modern scanners for wafer alignment. Light reflected from the SLM forms a diffraction pattern which is used to determine the exact position of the wafer. The signal strength of the diffraction order needs to reach a certain threshold for the scanner to detect it. The marks are changed as the wafers go through various processes and are buried underneath complex film stacks. These processes and stacks can severely reduce wafer quality (WQ). Equipment manufactures recommend several variations of the SLM to improve WQ but these variations are not effective for certain advanced processes. This paper discusses theoretical analysis of how SLM designs affect wafer quality, addresses the challenge of self-aligned double patterning (SADP) on SLMs and experimentally verifies results using various structures.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jianming Zhou, Craig Hickman, Yuan He, Scott Light, Lucas Lamonds, and Anton deVilliers "Wafer quality analysis of various scribe line mark designs", Proc. SPIE 7971, Metrology, Inspection, and Process Control for Microlithography XXV, 79711H (20 April 2011); https://doi.org/10.1117/12.881551
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconducting wafers

Spatial light modulators

Optical alignment

Diffraction

Scanners

Reflection

Signal detection

RELATED CONTENT


Back to Top