Paper
5 May 2010 Silicon carbide NEMS logic for high-temperature applications
Mehran Mehregany, Te-Hao Lee
Author Affiliations +
Abstract
This paper reports cantilever-type nano-electro-mechanical systems (NEMS) silicon carbide (SiC) switches capable of operation from 25°C to 600°C, with threshold voltages ≤5 V. The fabricated SiC switches are actuated electrostatically, wherein the suspended cantilever electrode is pulled down to contact the bottom stationary electrode. The switches, fabricated using surface micromachining, have electrode separation gaps determined by the ~75 nm-thick sacrificial SiO2. Two-terminal switches have been cycled more than 40 billion times at room temperature until failure and more than 2 million times at 600°C when the package wire bonds fail. The room temperature failure mechanisms of these switches are mechanical fracture and stiction. Stiction of the switch electrodes is strongly correlated to the roughness of their contacting surfaces. Measurements indicate that 60% of switches with 8 nm electrode surface roughness could be operated over billions cycles before fracture. In contrast, 85% of the switches with 1 nm roughness were stuck after fabrication release.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mehran Mehregany and Te-Hao Lee "Silicon carbide NEMS logic for high-temperature applications", Proc. SPIE 7679, Micro- and Nanotechnology Sensors, Systems, and Applications II, 76791J (5 May 2010); https://doi.org/10.1117/12.849826
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Switches

Silicon carbide

Electrodes

Nanoelectromechanical systems

Oxides

Resistance

Logic

Back to Top