Paper
11 October 2010 Fiber Bragg grating demodulatin system based on ARM and LabVIEW
Ying Zhang, Chunhui Wu, Yinrui Qiu
Author Affiliations +
Abstract
A novel FBG sensing signal demodulation system based on ARM7 and LabVIEW8.6 is proposed. Matching FBG demodulation method is used to demodulate the luminous intensity signal. The screw attached to stepper motor is controlled by ARM7 microprocessor to impel the cantilever and makes the matching FBG adhered on the cantilever to scan the Bragg wavelengths offset of the sensing FBG. With the synthetics curve of the steps of the motor and Bragg wavelengths of the sensing FBG, we can calculate the tiny offset of wavelength and realize the intention of FBG sensing signal demodulation. After being processed by the weak signal processing circuit and AD convert circuit, the electrical signal converted from the luminous intensity signal enters the MCU. The data coming from the ARM is filtered by the LabVIEW and displayed on the PC. The maximal strain measuring range of 1100με and the measuring accuracy of ±1με are archived in the experiment. The experiment shows that the result of strain tested and the theory one have a good linear relationship.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ying Zhang, Chunhui Wu, and Yinrui Qiu "Fiber Bragg grating demodulatin system based on ARM and LabVIEW", Proc. SPIE 7656, 5th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment, 765605 (11 October 2010); https://doi.org/10.1117/12.864091
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Demodulation

Sensing systems

Signal processing

LabVIEW

Sensors

Control systems

Back to Top