The use of surface modifiers to mitigate pattern collapse in thin film lithography

David E. Noga; Wei-Ming Yeh; Richard A. Lawson; Laren M. Tolbert; Clifford L. Henderson

doi:10.1117/12.862008

30 March 2010 The use of surface modifiers to mitigate pattern collapse in thin film lithography

David E. Noga, Wei-Ming Yeh, Richard A. Lawson, Laren M. Tolbert, Clifford L. Henderson

Proceedings Volume 7639, Advances in Resist Materials and Processing Technology XXVII; 76391H (2010) https://doi.org/10.1117/12.862008
Event: SPIE Advanced Lithography, 2010, San Jose, California, United States

Abstract

It has become clear that although line edge roughness and resolution are important for future lithographic technology nodes, other issues such as pattern collapse must be addressed as well. One of the primary modes of pattern collapse is pattern collapse caused by loss of adhesion of the resist from the substrate. The main forces which govern pattern collapse by adhesion failure are related to substrate/resist interactions. Though several methodologies to improve pattern collapse have been investigated, such as the use of surfactants during the final rinse, the use of such methods virtually all suffer from some serious drawback. To this end, we have developed a reactive surface modifier capable of covalently attaching to a positive tone resists containing hydroxystyrene groups. A vinyl-ether-modified silane was prepared and effectively applied using a solution silanization reaction. A hydroxystyrene-based positive tone copolymer resist was applied and subjected to a post apply bake to allow sufficient time for reaction with the surface modifier to occur prior to patterning using e-beam lithography. Ultimately, it was determined that covalent attachment of the surface modifier to the photoresist during the post apply bake resulted in enhanced resist/substrate adhesion of photoresist lines as evidenced by improved pattern collapse performance in high resolution imaging experiments.

Citation Download Citation

David E. Noga, Wei-Ming Yeh, Richard A. Lawson, Laren M. Tolbert, and Clifford L. Henderson "The use of surface modifiers to mitigate pattern collapse in thin film lithography", Proc. SPIE 7639, Advances in Resist Materials and Processing Technology XXVII, 76391H (30 March 2010); https://doi.org/10.1117/12.862008

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available