Paper
28 December 2010 Whole-field measurement of strain based on digital speckle correlation method
Yonghong Wang, Chen Fang, Lianxiang Yang
Author Affiliations +
Proceedings Volume 7544, Sixth International Symposium on Precision Engineering Measurements and Instrumentation; 75442K (2010) https://doi.org/10.1117/12.885599
Event: Sixth International Symposium on Precision Engineering Measurements and Instrumentation, 2010, Hangzhou, China
Abstract
Traditionally extensometer has been used to measure the tensile strain to determine mechanical properties such as elastic modulus, yield and tensile strength. But it can only measure the average strain within the gauge length and can not produces the information on the strain distribution inside two knife point. This paper presents a novel method which uses digital speckle correlation technique, and produces whole-field strain for a better understanding of material behavior. It offers a significant advantage over conventional techniques with an extensometer in tensile test. The measurement results are presented with a comparison of the traditional method, and the data evaluation method is discussed in detail. This paper demonstrates the capabilities of technique for both quantitative and qualitative strain measurement in a whole field environment, which is almost impossible with the traditional method.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yonghong Wang, Chen Fang, and Lianxiang Yang "Whole-field measurement of strain based on digital speckle correlation method", Proc. SPIE 7544, Sixth International Symposium on Precision Engineering Measurements and Instrumentation, 75442K (28 December 2010); https://doi.org/10.1117/12.885599
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Speckle

Calibration

Cameras

Digital cameras

Detection and tracking algorithms

Environmental sensing

Metals

Back to Top