Paper
2 February 2009 Current sensor based on giant magnetostrictive material and fiber Bragg grating
Bing-hao Bao, Ling Zhang
Author Affiliations +
Abstract
A new type of fiber optical current sensor was designed. The sensing head was made by holding a fiber Bragg grating (FBG) on a giant magnetostrictive material (GMM) rod along the axial direction. The sensing head was put into one of the air gap of two silicon plate magnetic cores wound by enameled cable. In order to improve the linearity of the sensor, another silicon plate core with coil was inserted into the other air gap to provide a biased magnetic field for the Terfenol-D rod. The Terfenol-D rod was elongated in the magnetic field varying with the measured current and the strain caused the shift of the center wavelength of FBG. In certain biased magnetic field, the relationship between the measured current and the wavelength shift is linear. Experimental results show that the linear tuning range of FBG is 0.07nm when the measured current of the winding is 0~3A. The corresponding measurable current of straight conductor is 0~ 2313.07A on the assumption that the distance between the axis of the straight conductor and the GMM rod is 10mm.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Bing-hao Bao and Ling Zhang "Current sensor based on giant magnetostrictive material and fiber Bragg grating", Proc. SPIE 7157, 2008 International Conference on Optical Instruments and Technology: Advanced Sensor Technologies and Applications, 715705 (2 February 2009); https://doi.org/10.1117/12.805294
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Magnetism

Sensors

Magnetic sensors

Magnetostrictive materials

Silicon

Head

Back to Top