Process development for high scan speed ArF immersion lithography

Nobuji Matsumura; Norihiko Sugie; Kentaro Goto; Koichi Fujiwara; Yoshikazu Yamaguchi; Hirokazu Tanizaki; Katsushi Nakano; Tomoharu Fujiwara; Shinya Wakamizu; Hirofumi Takeguchi; Hiroshi Arima; Hideharu Kyoda; Kosuke Yoshihara; Junichi Kitano

doi:10.1117/12.771795

4 April 2008 Process development for high scan speed ArF immersion lithography

Nobuji Matsumura, Norihiko Sugie, Kentaro Goto, Koichi Fujiwara, Yoshikazu Yamaguchi, Hirokazu Tanizaki, Katsushi Nakano, Tomoharu Fujiwara, Shinya Wakamizu, Hirofumi Takeguchi, Hiroshi Arima, Hideharu Kyoda, Kosuke Yoshihara, Junichi Kitano

Author Affiliations +

Proceedings Volume 6923, Advances in Resist Materials and Processing Technology XXV; 69230D (2008) https://doi.org/10.1117/12.771795
Event: SPIE Advanced Lithography, 2008, San Jose, California, United States

Abstract

It has been found that 193nm immersion lithography technology can achieve smaller patterns without any modification to the technology infrastructure of existing state-of-the-art 193nm dry lithography. This has made 193nm immersion lithography a promising technology for mass production processes. Recently, scanning speed of the exposure stage has been increasing in order to achieve high throughput for mass production. At present, the adoption of a topcoat is one of the promising candidates for this high speed scanning process. On the other hand, the demand for a non-topcoat process is being pursued from a C.O.O. (cost of ownership) point of view but there are still issues being revealed and concerns to be solved. In this report, feasibility of a comprehensive process for high scanning ArF immersion lithography was discussed. As for the topcoat process, a high receding contact angle topcoat, such as TC-A (JSR), is proving to be a good candidate for mass production using high scanning speed immersion lithography. TC-A has a similar defectivity and lithographic performance to TCX041 (JSR). On the other hand, the feasibility of a non-topcoat process was also investigated. CD uniformity, defectivity and lithography performance of AIM5120JN and AIM5570JN (JSR) data indicate that the non-topcoat process can be adopted for mass production process. An immersion cluster comprised of a high volume production immersion exposure tool, S610C (NIKON) having 1.3 NA and CLEAN TRACK^TM LITHIUS^TM i+ (TEL) track system were used in this study.

Citation Download Citation

Nobuji Matsumura, Norihiko Sugie, Kentaro Goto, Koichi Fujiwara, Yoshikazu Yamaguchi, Hirokazu Tanizaki, Katsushi Nakano, Tomoharu Fujiwara, Shinya Wakamizu, Hirofumi Takeguchi, Hiroshi Arima, Hideharu Kyoda, Kosuke Yoshihara, and Junichi Kitano "Process development for high scan speed ArF immersion lithography", Proc. SPIE 6923, Advances in Resist Materials and Processing Technology XXV, 69230D (4 April 2008); https://doi.org/10.1117/12.771795

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE