Wafer-level vacuum packaged resonant micro-scanning mirrors for compact laser projection displays

Ulrich Hofmann; Marten Oldsen; Hans-Joachim Quenzer; Joachim Janes; Martin Heller; Manfred Weiss; Georgios Fakas; Lars Ratzmann; Eleonora Marchetti; Francesco D'Ascoli; Massimiliano Melani; Luca Bacciarelli; Emilio Volpi; Francesco Battini; Luca Mostardini; Francesco Sechi; Marco De Marinis; Bernd Wagner

doi:10.1117/12.763433

21 February 2008 Wafer-level vacuum packaged resonant micro-scanning mirrors for compact laser projection displays

Ulrich Hofmann, Marten Oldsen, Hans-Joachim Quenzer, Joachim Janes, Martin Heller, Manfred Weiss, Georgios Fakas, Lars Ratzmann, Eleonora Marchetti, Francesco D'Ascoli, Massimiliano Melani, Luca Bacciarelli, Emilio Volpi, Francesco Battini, Luca Mostardini, Francesco Sechi, Marco De Marinis, Bernd Wagner

Author Affiliations +

Proceedings Volume 6887, MOEMS and Miniaturized Systems VII; 688706 (2008) https://doi.org/10.1117/12.763433
Event: MOEMS-MEMS 2008 Micro and Nanofabrication, 2008, San Jose, California, United States

Abstract

Scanning laser projection using resonant actuated MEMS scanning mirrors is expected to overcome the current limitation of small display size of mobile devices like cell phones, digital cameras and PDAs. Recent progress in the development of compact modulated RGB laser sources enables to set up very small laser projection systems that become attractive not only for consumer products but also for automotive applications like head-up and dash-board displays. Within the last years continuous progress was made in increasing MEMS scanner performance. However, only little is reported on how mass-produceability of these devices and stable functionality even under harsh environmental conditions can be guaranteed. Automotive application requires stable MEMS scanner operation over a wide temperature range from -40° to +85°Celsius. Therefore, hermetic packaging of electrostatically actuated MEMS scanning mirrors becomes essential to protect the sensitive device against particle contamination and condensing moisture. This paper reports on design, fabrication and test of a resonant actuated two-dimensional micro scanning mirror that is hermetically sealed on wafer level. With resonant frequencies of 30kHz and 1kHz, an achievable Theta-D-product of 13mm.deg and low dynamic deformation <20nm RMS it targets Lissajous projection with SVGA-resolution. Inevitable reflexes at the vacuum package surface can be seperated from the projection field by permanent inclination of the micromirror.

Citation Download Citation

Ulrich Hofmann, Marten Oldsen, Hans-Joachim Quenzer, Joachim Janes, Martin Heller, Manfred Weiss, Georgios Fakas, Lars Ratzmann, Eleonora Marchetti, Francesco D'Ascoli, Massimiliano Melani, Luca Bacciarelli, Emilio Volpi, Francesco Battini, Luca Mostardini, Francesco Sechi, Marco De Marinis, and Bernd Wagner "Wafer-level vacuum packaged resonant micro-scanning mirrors for compact laser projection displays", Proc. SPIE 6887, MOEMS and Miniaturized Systems VII, 688706 (21 February 2008); https://doi.org/10.1117/12.763433

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE