Characterization of carbon nanotube thin films formed using electronic-grade carbon nanotube aqueous solutions

Xuliang Han; Daniel C. Janzen

doi:10.1117/12.759714

8 January 2008 Characterization of carbon nanotube thin films formed using electronic-grade carbon nanotube aqueous solutions

Xuliang Han, Daniel C. Janzen

Author Affiliations +

Proceedings Volume 6838, Optoelectronic Devices and Integration II; 683811 (2008) https://doi.org/10.1117/12.759714
Event: Photonics Asia 2007, 2007, Beijing, China

Abstract

Carbon nanotubes (CNTs) are of great interests for a wide range of applications because of their unique structural, mechanical, electrical, optical, thermal, and chemical properties. Particularly, CNT thin films can be used as mechanically flexible, electrically conductive, and broadband optically transparent electrodes in various optoelectronic devices. However, one crucial obstacle to implementing CNT-based applications has been the unavailability of pure CNTs suitable for direct industrial use. The as-produced CNTs are very fluffy soot, and thus extremely difficult to be handled in the device fabrication process. Although CNTs can be grown directly on a substrate from the catalyst deposited on the substrate surface, the growing temperature is very high, typically > 900°C, which represents a big challenge to device fabrication and integration. Another issue is that the catalyst on the substrate surface must be removed without affecting the grown CNTs. In the raw CNT soot, there is always a considerable amount of impurities, including metallic particles from the catalyst and carbonaceous impurities from the chemical reaction by-products. Such impurities can greatly degrade the properties of CNT thin films. The production of electronic-grade CNT aqueous solutions, which contain only individually suspended pure CNTs without any kind of surfactant, is a critical milestone for implementing CNT-based applications. By using such solutions, pure CNT thin films of various densities can be formed through common solution-casting processes, such as spin coating, spray coating, micro-dispensing, and ink-jet printing. The properties of these pure CNT thin films will be discussed in this paper.

Citation Download Citation

Xuliang Han and Daniel C. Janzen "Characterization of carbon nanotube thin films formed using electronic-grade carbon nanotube aqueous solutions", Proc. SPIE 6838, Optoelectronic Devices and Integration II, 683811 (8 January 2008); https://doi.org/10.1117/12.759714

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE