Paper
4 January 2008 Reactive ion beam etching of multilayer diffraction gratings with SiO2 as the top layer
Ying Liu, Xiangdong Xu, Yilin Hong, Dequan Xu, Shaojun Fu
Author Affiliations +
Abstract
Multilayer dielectric grating plays an important role in the laser inertial confinement fusion, which is fabricated by using holographic lithography and ion beam etching. In this paper details the reactive ion beam etching of multilayer dielectric grating with SiO2 as the top layer. The etching of SiO2 was carried out by a radio frequency reactive ion beam etcher with CHF3 chemistry to increase the etch selectivity and get a high fidelity grating pattern transfer from photoresist into SiO2 coating. The photoresist gratings with different profiles as masks were used to create SiO2 corrugations with different profiles separately. The etching results were analyzed in detail, including the facet and redeposition effects. In conclusion, it is essential that the photoresist grating mask should be high and steep enough to get SiO2 grating with vertical profiles. The multilayer dielectric grating with SiO2 as the top layer exhibited an efficiency of about 95% in the - 1 order at TE polarization of 1 064 nm light at Littrow mounting.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ying Liu, Xiangdong Xu, Yilin Hong, Dequan Xu, and Shaojun Fu "Reactive ion beam etching of multilayer diffraction gratings with SiO2 as the top layer", Proc. SPIE 6832, Holography and Diffractive Optics III, 68322O (4 January 2008); https://doi.org/10.1117/12.758011
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silica

Etching

Photoresist materials

Diffraction gratings

Photomasks

Ion beams

Reactive ion etching

Back to Top