Fast lithography simulation under focus variations for OPC and layout optimizations

Peng Yu; David Z. Pan; Chris A. Mack

doi:10.1117/12.658110

14 March 2006 Fast lithography simulation under focus variations for OPC and layout optimizations

Peng Yu, David Z. Pan, Chris A. Mack

Proceedings Volume 6156, Design and Process Integration for Microelectronic Manufacturing IV; 615618 (2006) https://doi.org/10.1117/12.658110
Event: SPIE 31st International Symposium on Advanced Lithography, 2006, San Jose, California, United States

Abstract

In 90nm technology and beyond, process variations should be considered such that the design will be robust with respect to process variations. Focus error and exposure dose variations are the two most important lithography process variations. In a simple approximation, the critical dimension (CD) is about linearly related to the exposure dose variation, while it is quadratically related to the focus variation. Other kinds of variations can be reduced to these variations effectively as long as they are small. As a metric to measure the effects of exposure dose variations, normalized image log-slope (NILS) is pretty fast to compute once we have the aerial images. OPC software has used it as an optimization objective. But focus variation has not been commonly considered in current OPC software. One way is to compute several aerial images at different defocus conditions, but this approach is very time consuming. In this paper, we derive an analytical formula to compute the aerial image under any defocus condition. This method works for any illumination scheme and is applicable to both binary and phase shift masks (PSM). A model calibration method is also provided. It is demonstrated that there is only about 2-3x runtime increase using our fast focus-variational lithography simulation compared to the current single-focus lithography simulation. To confirm the accuracy, our model is compared with PROLITH^TM. This ultra-fast simulator can enable better and faster process-variation aware OPC to make layouts more robust under process variations, and directly guide litho-aware layout optimizations.

Citation Download Citation

Peng Yu, David Z. Pan, and Chris A. Mack "Fast lithography simulation under focus variations for OPC and layout optimizations", Proc. SPIE 6156, Design and Process Integration for Microelectronic Manufacturing IV, 615618 (14 March 2006); https://doi.org/10.1117/12.658110

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available